ISO 16546:2020 PDF

Name: ISO 16546:2020 — Thermal insulating products for building applications — Determination of freeze-thaw resistance
SKU: ISO 16546:2020
Price: 25 EUR
Availability: InStock

Thermal insulating products for building applications — Determination of freeze-thaw resistance

Название (английский):

ISO 16546:2020

Thermal insulating products for building applications — Determination of freeze-thaw resistance

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 12 июня 2020 г.
Издание:: ISO IS 16546 edition 2 version 1
ICS:: 91.100.60

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

This document specifies the equipment and test method for determining the effects of successive cycling from dry conditions at −20 °C to wet conditions at 20 °C on the mechanical properties and moisture content of thermal insulating products. This document is intended to simulate the freeze?thaw effects on thermal insulating products which are frequently exposed to water and low temperature conditions, e.g. inverted roofs and unprotected ground insulation.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

ISO 16546:2020 - Overview

ISO 16546:2020 specifies a laboratory test method to determine the freeze–thaw resistance of thermal insulating products for building applications. The standard defines equipment, specimen preparation and an automated cycling procedure that simulates repeated transitions from dry cold (−20 ± 2 °C) to wet warm (20 ± 2 °C) conditions. The test assesses changes in water absorption and mechanical (compression) performance after 300 successive freeze–thaw cycles - a scenario representative of products exposed to moisture and low temperatures (for example, inverted roofs and unprotected ground insulation).

Key topics and technical requirements

Test principle: Continuous, automatic cycles between freezing in air and thawing in water to evaluate degradation in moisture uptake and compression behaviour.

Number of cycles: 300 successive freeze–thaw cycles.

Temperatures & timing: Freeze at −20 ± 2 °C for 1 hour; thaw in water at 20 ± 2 °C for 1 hour (automatic, continuous transfer between stages).

Apparatus: Cold chamber, water tank (water depth ~5 ± 2 cm above specimen), balance (accuracy 0.1 g), compression testing machine per ISO 29469.

Specimens: Use the same specimens prepared for long‑term water absorption tests (ISO 16536 by diffusion or ISO 16535 by immersion). Typical set A dimensions are square specimens of (500 ± 1) mm or (200 ± 1) mm depending on the chosen absorption method.

Conditioning: Preconditioning at (23 ± 5) °C (or (23 ± 2) °C and 50 ± 5 % RH if disputed); tropical alternatives noted.

Measurements & calculations: Determine mass changes to calculate water absorption (mass or volume percent) and measure compressive strength or stress at 10 % deformation in wet and dry states; express changes as percentage differences.

Reporting: Include method used, specimen details, cycle count, measured water uptake and changes in compression behaviour, and visual observations (cracks, blisters).

Applications and who uses it

ISO 16546 is intended for:

Manufacturers of thermal insulation validating product durability under freeze–thaw exposure.

Independent test laboratories performing conformity and performance testing.

Specifiers, architects and engineers assessing suitability of insulation for inverted roofs, exposed ground insulation, or other wet/cold conditions.

Regulators and certification bodies establishing performance criteria in building standards and product certifications.

The standard helps stakeholders compare products, verify durability claims, and mitigate moisture-related performance loss in building insulation systems.

Related standards

ISO 16536 - long‑term water absorption by diffusion

ISO 16535 - long‑term water absorption by immersion

ISO 29469 - determination of compression behaviour

Keywords: ISO 16546, freeze‑thaw resistance test, thermal insulating products, building insulation, water absorption, compression behaviour, inverted roofs, ground insulation, laboratory testing.

ISO 16546:2020 PDF

Abstract

Похожие стандарты

ISO 16546:2020 - Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

SIST EN ISO 29469:2023

Thermal insulating products for building applications - Determination of compression behaviour (ISO 29469:202…

SIST EN ISO 16536:2019

Thermal insulating products for building applications - Determination of long term water absorption by diffus…

SIST EN ISO 16535:2019

Thermal insulating products for building applications - Determination of long- term water absorption by immer…

SIST EN ISO 16546:2020

Thermal insulating products for building applications - Determination of freeze-thaw resistance (ISO 16546:20…