ISO 16827:2025 PDF

Name: ISO 16827:2025 — Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities
SKU: ISO 16827:2025
Price: 25 EUR
Availability: InStock

Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities

Название (английский):

ISO 16827:2025

Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 50
Дата публикации:: 11 июня 2025 г.
Издание:: ISO IS 16827 edition 2 version 1
ICS:: 19.100

Тип поставки:

Full version750 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:9 раб. дн. (перевод)

Цена:750 €

Описание (английский):

This document specifies the general principles and techniques for the characterization and sizing of previously detected discontinuities in order to ensure their evaluation against applicable acceptance criteria. This document is applicable, in general terms, to discontinuities in those materials and applications covered by ISO 16810. Phased array techniques can also be applied but additional steps or verifications can be needed.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 16827:2025 - "Non‑destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities" defines general principles and techniques for characterizing and sizing previously detected discontinuities so they can be evaluated against applicable acceptance criteria. The standard applies, in general terms, to the materials and applications covered by ISO 16810. It covers pulse‑echo and through‑transmission ultrasonic testing approaches and notes that phased‑array techniques can also be used, although additional verification steps may be required.

Key technical topics and requirements

Purpose: Determine ultrasonic parameters (echo height, time‑of‑flight), geometry (location, orientation, shape), sizing (dimensions, area/volume or representative parameters) and proximity to surfaces/other discontinuities.

Surface condition requirements: Recommended surface roughness for accurate sizing - R = 6.3 μm for machined surfaces and R = 12.5 μm for shot‑blasted surfaces. Maximum probe‑to‑surface gap: 0.5 mm. Surface prep must not introduce excessive noise.

Pulse‑echo techniques: Location, orientation, assessment of multiple indications, echo height, shape classification, and several sizing methods (maximum echo height, probe movement, focusing probes, mathematical algorithms, special and iterative techniques).

Through‑transmission technique: Location and sizing approaches, treatment of multiple discontinuities and amplitude reduction evaluation.

Sizing methods and validation: Normative and informative annexes provide detailed procedures - e.g., analysis of multiple indications, classification of discontinuity shape, maximum echo height sizing, probe movement sizing, iterative and algorithmic estimation methods.

Traceability to acceptance criteria: Characterization techniques must be specified relative to the applicable acceptance criteria; ISO 16810 provisions apply unless otherwise stated.

Practical applications and who uses this standard

ISO 16827:2025 is used by professionals involved in ultrasonic non‑destructive testing (NDT) who need reliable assessment of discontinuities before making fitness‑for‑service or acceptance decisions:

NDT technicians and inspectors performing sizing and characterization during inspections

Quality and inspection engineers developing acceptance procedures and inspection plans

Asset owners and operators requiring consistent evaluation of known defects in components such as forgings and castings (examples illustrated in the standard)

Standards writers and test laboratories implementing validated ultrasonic sizing methods, including pulse‑echo, through‑transmission and phased‑array workflows

Related standards (for context)

ISO 16810 - Ultrasonic testing: General principles

ISO 16811 - Sensitivity and range setting

ISO 16823 - Through‑transmission technique

ISO 16828 - Time‑of‑flight diffraction (TOFD) for detection and sizing

Keywords: ISO 16827:2025, ultrasonic testing, non‑destructive testing, characterization, sizing of discontinuities, pulse‑echo, through‑transmission, phased array, echo height, time of flight.

ISO 16827:2025 PDF

Abstract

Похожие стандарты

Overview

Key technical topics and requirements

Practical applications and who uses this standard

Related standards (for context)

Технические детали

SIST EN ISO 16810:2025

Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2024)

BS EN ISO 16811:2025

Non-destructive testing. Ultrasonic testing. Sensitivity and range setting.

SIST EN ISO 16823:2025

Non-destructive testing - Ultrasonic testing - Through-transmission technique (ISO 16823:2025)

SIST EN ISO 16828:2025

Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique for detection and sizing…