ISO 16866:2020 PDF

Overview

ISO 16866:2020 - "Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)" specifies a laboratory method for simultaneously measuring the thickness of individual electroplated nickel layers and the electrode potential differences between them. The STEP test is a modification of the coulometric (anodic dissolution) method and is intended exclusively for electroplated multilayer nickel coatings.

Key topics and technical requirements

• STEP test principle: constant-current anodic dissolution of the nickel coating while recording potential versus a reference electrode; layer thickness is calculated from dissolution time (per ISO 2177) and potential jumps reveal inter-layer potential differences.
• Measuring cell design: typical cells use an Ag/AgCl reference electrode implemented as a silver wire or silver ring; both variants give comparable measurement uncertainty when properly calibrated.
• Test solution (typical composition specified):
  • Nickel(II) chloride hexahydrate NiCl2·6H2O - 300 g/L
  • Sodium chloride (NaCl) - 50 g/L
  • Boric acid (H3BO3) - 25 g/L
  • pH ≈ 3.0; use water of grade 3 (ISO 3696)
• Pre-test preparation: parts must be de-chromed and activated without visibly damaging nickel layers; surface cleanliness and absence of oxides/contamination are essential.
• Quality factors: use fresh electrolyte; condition reference electrodes (AgCl layer); control measurement area and contact pressure; ensure good electrical contacts; remove Ni deposits from cathode to avoid noisy signals; verify complete dissolution visually.
• Evaluation and reporting: thickness calculation per ISO 2177, documentation of potential differences, and estimation of measurement uncertainty are required. Sampling for production testing is referenced to ISO 2859 series.

Practical applications and users

ISO 16866:2020 is intended for practical use in:

• Quality control and process monitoring in electroplating shops
• Laboratory testing for automotive and industrial component suppliers (the STEP test is widely used in the automotive sector)
• Corrosion testing and failure analysis to assess galvanic behavior of multilayer nickel systems
• R&D and surface engineering teams developing multilayer nickel coatings and additives

Typical outputs: layer-by-layer thickness measurements, inter-layer potential differences (useful for predicting corrosion behavior), and traceable test reports for product specifications and supplier acceptance.

Related standards

• ISO 2177 - Coulometric method for coating thickness by anodic dissolution (used for thickness calculation)
• ISO 3696 - Water for analytical laboratory use (specifies water purity)
• ISO 2859-1 / ISO 2859-2 - Sampling procedures for inspection by attributes (referenced for production sampling)

Keywords: ISO 16866:2020, STEP test, multilayer nickel coatings, electrode potential, thickness measurement, coulometric method, electroplated nickel, Ag/AgCl reference electrode, coating quality control.