ISO 16940:2008 PDF

Name: ISO 16940:2008 — Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass
SKU: ISO 16940:2008
Price: 25 EUR
Availability: InStock

Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass

Название (английский):

ISO 16940:2008

Glass in building — Glazing and airborne sound insulation — Measurement of the mechanical impedance of laminated glass

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 25 ноября 2008 г.
Издание:: ISO IS 16940 edition 1 version 1
ICS:: 81.040.20

Тип поставки:

Full version135 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:135 €

Описание (английский):

ISO 16940:2008 describes a method for the measurement of the loss factor and the equivalent bending rigidity modulus of laminated glass test pieces. The aim is to compare the properties of interlayers. These two parameters (and others such as density and thicknesses of glass components) can be related to the sound transmission loss (STL) of the glazing itself.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 16940:2008 - Glass in building - Glazing and airborne sound insulation - Measurement of the mechanical impedance of laminated glass specifies a laboratory method to measure the loss factor and the equivalent bending rigidity modulus of laminated glass test pieces. The standard is intended to compare the mechanical (damping and stiffness) properties of different interlayers and to relate these parameters - together with density and glass thickness - to the sound transmission loss (STL) of glazing.

Key topics and technical requirements

Measurement principle: input mechanical impedance (transfer function between injected force and velocity) is measured on a beam sample to identify resonance frequencies and modal bandwidths.

Loss factor calculation: η = Δf / fres,i where Δf is the resonance bandwidth and fres,i is the ith resonance frequency. If –3 dB points are not available, a –2 dB correction using a factor (1.31) is permitted.

Sample and fixation: beam samples (narrow strips) are used to reduce modal density; nominal glass pane thickness for comparison is 4 mm. Samples are glued to a 15 mm impact button and measured at mid-span.

Instrumentation: environmental chamber (or conditioned room), white-noise generator (0–5 000 Hz), shaker, power amplifier, impedance head (force transducer + accelerometer), measuring amplifiers and FFT dual-channel analyser or equivalent software.

Test conditions: measurements at (20 ± 1) °C with at least 1 hour thermal conditioning of samples.

Modal data and derived parameters: resonance frequencies and loss factors for the first three modes are recorded; Annex B describes computation of equivalent bending rigidity from modal data; Annex C (Cremer equation) shows how to calculate STL and one-third-octave band results. The weighted sound reduction index Rw (ISO 717-1) should be reported.

Applications and who uses it

Glass manufacturers and R&D teams - evaluate and compare damping properties of different interlayers for laminated glass.

Acoustic consultants and façade engineers - predict glazing airborne sound insulation performance (STL) from material measurements rather than full-size acoustic tests.

Test laboratories and quality control - routine measurement to verify product consistency and to support acoustic declarations.

Product developers - optimize laminate constructions (interlayer type/thickness) to improve sound insulation in buildings, vehicles or partitions.

Related standards

ISO 12543-1 (laminated glass definitions)

ISO 140-1 and ISO 140-3 (laboratory sound insulation measurement requirements)

ISO 717-1 (rating of airborne sound insulation) (Annex C of ISO 16940 references the Cremer approach for STL calculation.)

Keywords: ISO 16940:2008, laminated glass, mechanical impedance measurement, loss factor, bending rigidity, sound transmission loss, glazing acoustics, interlayer properties, STL, Rw.

ISO 16940:2008 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

SIST EN ISO 717-1:2021

Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulat…

SIST EN ISO 12543-1:2022

Glass in building - Laminated glass and laminated safety glass - Part 1: Vocabulary and description of compon…

BS EN ISO 140-18:2006

Acoustics. Measurement of sound insulation in buildings and of building elements. Laboratory measurement of s…

BS ISO 14030-3:2022

Environmental performance evaluation. Green debt instruments. Taxonomy.