ISO 17324:2014 PDF

Name: ISO 17324:2014 — Rubber hoses for automotive turbochargers — Specification
SKU: ISO 17324:2014
Price: 25 EUR
Availability: InStock

Rubber hoses for automotive turbochargers — Specification

Название (английский):

ISO 17324:2014

Rubber hoses for automotive turbochargers — Specification

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 17 сентября 2014 г.
Издание:: ISO IS 17324 edition 1 version 1
ICS:: 43.040.01

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 17324:2014 specifies requirements of rubber hoses used in the automotive turbocharger system to connect turbocharger, intercooler, and internal combustion engine at the working temperatures from −40°C to +250°C and the working pressures from −0,01MPa(−0,1bar) to 0,5MPa(5bar). Hoses covered by ISO 17324:2014 may be straight or shaped.

Abstract

Overview

Key Topics

Scope and classification
- Type A: air filter → turbocharger (−40 °C to +100 °C; vacuum to −0,01 MPa).
- Type B: turbocharger → intercooler (pressurized, heated air); subtypes B1/B2/B3 by temperature and classes by pressure.
- Type C: intercooler → engine (pressurized, cooled air; up to +140 °C).
Grades by fatigue resistance
- Grade 200 = 200,000 impulse cycles; Grade 400 = 400,000 cycles.
Materials and construction
- Typical elastomers: EPDM, CR, AEM, ACM, VMQ, FKM, etc.; reinforcements include textile (PET, PA) and aramid (AR) or wire.
- Hoses comprise a lining, reinforcement, and cover; options include smooth or corrugated profiles, insulation, and abrasion jackets.
Dimensions and tolerances
- Inside diameter, wall thickness and length tolerances (per ISO 4671); end squareness requirements.
Physical and performance requirements
- Compound property tests: heat ageing (ISO 188), low‑temperature brittleness (ISO 812), oil resistance (ISO 1817), ozone resistance (ISO 1431‑1).
- Hose tests: vacuum resistance (Type A), proof and minimum burst pressures (Type B & C) per ISO 1402, adhesion (ISO 8033), fatigue resistance (Annex A).
Marking, storage and testing frequency
- Requirements for identification, recommended production tests and routine/type testing procedures.

Applications

ISO 17324:2014 is directly applicable to:

OEMs and Tier 1/2 suppliers designing or sourcing turbocharger intake and boost hoses.
Quality and test engineers validating hoses against temperature, pressure, fatigue and chemical exposure criteria.
Materials engineers selecting elastomers, reinforcements and protective jackets for high-temperature, high-pressure boost circuits.
Procurement and regulatory teams requiring standardized specifications for compatibility and reliability in turbocharged engines. Practical use cases include charge‑air transfer between turbocharger, intercooler and intake manifold, and replacement/aftermarket hose specification.

Related Standards

Normative references used by ISO 17324:2014 include:

ISO 188, ISO 812, ISO 1402, ISO 1431‑1, ISO 1817, ISO 4671, ISO 7233, ISO 8033, ISO 8330/8331. These referenced test methods support conformity assessment and performance verification of turbocharger hoses.

Keywords: ISO 17324:2014, rubber hoses, automotive turbochargers, hose specification, working temperature, working pressure, fatigue resistance, proof pressure, burst pressure, hose materials.

Технические детали

Технический комитет: ISO/TC 45/SC 1 - Rubber and plastics hoses and hose assemblies
SKU: ISO 17324:2014

Главная

Каталог

SIST EN ISO 4671:2022

Действующий

Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the len…

Overview EN ISO 4671:2022 (ISO 4671:2022) specifies standardized methods of measurement for rubber and plastics hoses and hose assemblies. Published by CEN/ISO, this fourth-edition standard defines h…

19 · PDF

66 €

BS ISO 18828-2:2016

Действующий

Industrial automation systems and integration. Standardized procedures for production systems engineering. Re…

42 · PDF

50 €

PD ISO/TR 8124-9:2025

Действующий

Safety of toys - Safety aspects related to mechanical and physical properties. Comparison of ISO 8124-1, EN 7…

1 Scope This document consists of a comparison of the mechanical and physical requirements covered by the following toy safety standards: ISO: ISO 8124‑1:2022 ; Europe (CEN): EN 71‑1:2014+A1:2018 ; U…

PDF

407 €

BS ISO 18177:2025

Действующий

Plastics. Test method for estimation of the short chain branching distribution of semicrystalline ethylene 1-…

30 · PDF

50 €

ISO 1431-1:2004/Amd 1:2009

Отменён

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testin…

1 · PDF

123 €

ISO 14026:2017

Действующий

Environmental labels and declarations — Principles, requirements and guidelines for communication of footprin…

Overview ISO 14026:2017 - "Environmental labels and declarations - Principles, requirements and guidelines for communication of footprint information" establishes principles and requirements for cred…

17 · PDF

25 €

SIST EN ISO 8033:2017

Действующий

Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016)

Overview EN ISO 8033:2017 (identical to ISO 8033:2016) specifies standardized methods for the determination of adhesion between components of rubber and plastics hoses. The standard covers adhesion b…

20 · PDF

66 €

SIST EN ISO 7233:2021

Действующий

Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)

Overview EN ISO 7233:2021 (adopted by CEN as EN ISO 7233:2021) specifies test methods for determining the resistance to vacuum of rubber and plastics hoses and hose assemblies. The standard defines t…

13 · PDF

60 €

Открыть превью (2 стр.)

ISO 17324:2014 PDF

Abstract

Overview

Похожие стандарты

Key Topics

Applications

Related Standards

Технические детали

SIST EN ISO 4671:2022

Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the len…

BS ISO 18828-2:2016

Industrial automation systems and integration. Standardized procedures for production systems engineering. Re…

PD ISO/TR 8124-9:2025

Safety of toys - Safety aspects related to mechanical and physical properties. Comparison of ISO 8124-1, EN 7…

BS ISO 18177:2025

Plastics. Test method for estimation of the short chain branching distribution of semicrystalline ethylene 1-…

ISO 1431-1:2004/Amd 1:2009

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testin…

ISO 14026:2017

Environmental labels and declarations — Principles, requirements and guidelines for communication of footprin…

SIST EN ISO 8033:2017

Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016)

SIST EN ISO 7233:2021

Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)