ISO 17357-2:2014 PDF

Name: ISO 17357-2:2014 — Ships and marine technology — Floating pneumatic rubber fenders — Part 2: Low pressure
SKU: ISO 17357-2:2014
Price: 25 EUR
Availability: InStock

Ships and marine technology — Floating pneumatic rubber fenders — Part 2: Low pressure

Название (английский):

ISO 17357-2:2014

Ships and marine technology — Floating pneumatic rubber fenders — Part 2: Low pressure

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 16 января 2014 г.
Издание:: ISO IS 17357 edition 1 version 1
ICS:: 47.020.99

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

ISO 17357-2:2014 specifies the material, performance, and dimensions of low-pressure floating pneumatic rubber fenders, which are intended to be used for the berthing, and mooring of a ship to another ship or berthing structure. It also specifies the minimum test and inspection procedures for floating low-pressure pneumatic rubber fenders. ISO 17357-2:2014 does not address the methods for selecting the correct fender type or any safety hazards associated with its use.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 17357-2:2014 provides internationally accepted requirements for low-pressure floating pneumatic rubber fenders used in ship-to-ship and ship-to-berthing-structure berthing and mooring. The standard specifies materials, dimensions, performance criteria, minimum test and inspection procedures, and marking/documentation requirements for low-pressure fenders. It does not cover methods for selecting the correct fender for a specific application or address safety hazards associated with use.

Key topics and technical requirements

Fender types and classification

Defines two low-pressure types: clamped end (typically ≤ 2.3 m diameter) and moulded end (typically ≥ 2.8 m diameter).
Default initial internal pressure: 7 kPa unless otherwise specified.

Materials

Specifies coated textile construction (vulcanized synthetic rubber over high-tenacity woven nylon) and related component definitions (bead rings, end-closure plate assemblies, clamped end fittings).

Dimensions and ordering

Nominal diameter and length requirements, with purchaser information to include ISO number, fender type, initial pressure, size, and colour.

Performance and testing

Prototype performance confirmation and performance curves (guaranteed energy absorption and reaction force considerations).
Prototype tests: parallel compression, angular compression, durability, compression recovery, puncture resistance, and recording conditions.
Commercial fender inspections: material tests, dimensional inspection, air leakage, and hydrostatic pressure tests.

Quality assurance

Documentation and marking requirements for traceability.
Option for inspection/evaluation by a qualified independent inspection service or major classification society.

Normative references

Test methods and rubber/fabric standards referenced (e.g., ISO 37, ISO 48, ISO 815-1, ISO 1421, ISO 1431-1, ISO 2411).

Applications and who uses it

ISO 17357-2 is intended for manufacturers, naval architects, port/terminal engineers, ship operators, procurement teams, and classification societies involved with:

Specification and manufacture of marine fenders for berthing and mooring operations.

Verifying fender performance and conformance through prototype and commercial testing.

Preparing procurement documents and ensuring supplier quality control and traceability. The standard is a technical reference for product quality and test methods; users should combine it with operational risk assessments and energy-absorption selection methods not covered by this part.

Related standards

ISO 17357-1 - Ships and marine technology - Floating pneumatic rubber fenders - Part 1: High pressure

Normative test standards referenced within ISO 17357-2 (see clauses on normative references for ISO tensile, hardness, compression set, ozone resistance, coating adhesion, and tear tests).

Keywords: ISO 17357-2, low-pressure pneumatic rubber fenders, floating pneumatic fenders, marine fenders, fender testing, fender performance, berthing and mooring.

ISO 17357-2:2014 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

BS ISO 37108:2022

Sustainable cities and communities. Business districts. Guidance for practical local implementation of ISO 37…

ISO 4885:2026

Ferrous materials — Heat treatments — Vocabulary

ISO 815-1:2008

Rubber, vulcanized or thermoplastic — Determination of compression set — Part 1: At ambient or elevated tempe…

SIST EN ISO 1421:2017

Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016)

ISO 1431-1:2004/Amd 1:2009

Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testin…

SIST EN ISO 2411:2024

Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2024)

ISO 17357:2002

Ships and marine technology — High-pressure floating pneumatic rubber fenders

ISO 17357-1:2014

Ships and marine technology — Floating pneumatic rubber fenders — Part 1: High pressure