ISO 17505:2025 PDF
Soil and waste characterization — Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900)
Soil and waste characterization — Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 22
- Дата публикации:
- 4 июня 2025 г.
- Издание:
- ISO IS 17505 edition 1 version 1
- ICS:
- 13.080.10
This document specifies a method for the differentiated determination of the organic carbon content (TOC400) which is released at temperatures up to 400 °C, the residual oxidizable carbon (ROC) (including e.g. lignite (brown coal), hard coal, charcoal, black carbon, soot) and the inorganic carbon (TIC900) which is released at temperatures up to 900 °C. The basis of this method is the dry combustion or decomposition of carbon to CO2 in the presence of oxygen or non-oxygen conditions using temperatures ranging from 150 °C to 900 °C in dry solid samples of sediment, soil, soil with anthropogenic admixtures and solid waste (see Table 1) with carbon contents of more than 1 g per kg (0,1 % C) (per carbon type in the test portion). NOTE TIC900’ includes the TIC measured after acid addition e.g. by ISO 10694 or EN 15936. TOC400 is a fraction of TOC measured according to e.g. ISO 10694 or EN 15936.
Abstract
Overview
ISO 17505:2025 - Soil and waste characterization: Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900) specifies a thermal-gradient method to differentiate carbon fractions in dry solid samples (sediment, soils, urban soils, tailings, wastes such as incineration ash, foundry sand and construction waste). The method is based on dry combustion/decomposition to CO2 across a programmed temperature range (approximately 150 °C to 900 °C) to quantify:
- TOC400 - organic carbon released up to 400 °C
- ROC - residual oxidizable carbon (e.g., lignite, hard coal, charcoal, black carbon/soot), measured according to temperature plateaus (600 °C or 900 °C depending on method)
- TIC900 - inorganic carbon released up to 900 °C (including TIC after acid stripping)
The standard applies to samples containing more than 1 g/kg (0.1 % C) per carbon type in the test portion and supports CO2 detection by infrared or other CO2-sensitive sensors.
Key Topics and Requirements
- Principle: Temperature-gradient thermal oxidation/decomposition with switching between oxidizing and non-oxidizing carrier gases for selective carbon release.
- Two procedural variants:
- Method A: oxidative measurement sequence (TOC400 → ROC600 → TIC900A)
- Method B: mixed oxidative/non-oxidative sequence (used for ROC900 and TIC900B distinctions)
- Temperature control: defined plateaus (±20 °C) and minimum holding times for peak integration.
- Interferences addressed: carbides, sulfur and nitrogen compounds, carbonates (which can decompose across ranges), catalytic substances, premature releases/deflagrations, and peak-baseline issues.
- Quality elements: sample pretreatment, calibration, system control standards, reagents, apparatus specifications, measurement, evaluation, expression of results and reporting. Annex A covers performance characteristics; Annex B covers cooling procedures for method B.
Practical Applications and Who Uses It
ISO 17505:2025 is used for environmental assessment and materials characterization where a differentiated understanding of carbon forms is needed:
- Environmental and commercial analytical laboratories conducting soil and waste carbon analysis
- Landfill operators and waste managers assessing disposal/recycling suitability and hazard potential
- Soil scientists and remediation consultants evaluating carbon stability and pyrogenic (black) carbon content
- Regulatory agencies and consultants performing compliance testing or interpreting TOC/TIC-based criteria
Differentiating TOC400, ROC and TIC900 helps distinguish labile organic carbon from persistent pyrogenic carbon and inorganic carbon-useful for risk assessment, carbon accounting and management decisions.
Related Standards
- ISO 10694 / EN 15936 - Methods for TOC/TIC by acid stripping (TIC after acid addition referenced)
- EN 16179, EN 15002, ISO 11464 - Sample pretreatment and preparation standards referenced in ISO 17505:2025
Keywords: ISO 17505:2025, TOC400, ROC, TIC900, soil and waste characterization, temperature dependent differentiation, thermal oxidation, CO2 detection, carbon fractions, environmental laboratory.
Технические детали
- Технический комитет
- ISO/TC 190/SC 3 - Chemical and physical characterization
- SKU
- ISO 17505:2025
Похожие стандарты
Упомянутые в описании и другие стандарты ISO
SIST ISO 10694:1996
ДействующийSoil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
Overview ISO 10694:1995 - "Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)" specifies a laboratory method for measuring total carbon in air-dried s…
SIST ISO 11464:2006
ДействующийSoil quality -- Pretreatment of samples for physico-chemical analysis
Overview ISO 11464:2006 - "Soil quality - Pretreatment of samples for physico-chemical analysis" specifies standardized procedures for preparing soil samples prior to analysis of stable, non‑volatile…
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…