ISO 18192-3:2017 PDF

Name: ISO 18192-3:2017 — Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions
SKU: ISO 18192-3:2017
Price: 25 EUR
Availability: InStock

Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions

Название (английский):

ISO 18192-3:2017

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 12 июня 2017 г.
Издание:: ISO IS 18192 edition 1 version 1
ICS:: 11.040.40

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 18192-3:2017 defines a test procedure to simulate and evaluate lumbar spinal disc prostheses wear under adverse impingement conditions.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 18192-3:2017 (Impingement-wear testing for lumbar disc prostheses)

ISO 18192-3:2017 specifies a laboratory test procedure and corresponding environmental conditions to simulate and evaluate impingement wear of lumbar total intervertebral spinal disc prostheses under adverse kinematic conditions. The standard focuses on reproducing clinically relevant impingement scenarios (extension, flexion, lateral bending, combined motions) to assess wear, damage and worst-case contact behavior of lumbar prostheses in a controlled, physiological-like environment.

Key topics and technical requirements

Scope and principle

Simulate repeated contact between design features using axial load and time-varying angular displacement.
Consider extension (commonly reported), flexion, lateral bending and combined motions; axial rotation can be combined if needed to reproduce clinically relevant scars.

Definitions

Important terms: impingement, range of motion (ROM), distance between centre of rotation and point of impingement (DCI), and axial load during impingement (ALI).

Test specimens and controls

Recommended minimum: six specimens (or justified fewer); at least three per size when multiple sizes are tested.
For polymer components, include a load soak control to measure creep and fluid uptake.
Weighing precision: 0.1 mg for non-absorbing specimens.

Fluid and environmental conditions

Test medium: calf serum diluted with de‑ionized water to 20 g ± 2 g protein/l, prepared per ISO 18192-1.
Temperature, lubrication and enclosure per ISO 18192-1.

Apparatus and performance

Test machine conforming to ISO 4965-1 and ISO 23788 with coordinate system aligned to device centre of rotation.
Motion control: ±1° accuracy at motion extrema and ±5% cycle-time phasing.
Force control: axial force tolerance ±5% of maximum and ±5% phasing.

Test method details

Develop load/displacement profiles prior to testing; ROM shall be exceeded by at least 2° in the impingement direction and the impingement region must be offloaded each cycle.
Example: extension impingement using a 7.5 Nm moment; compute ALI by dividing the moment by DCI (in metres).

Annexes

Annex A: gravimetric wear measurement method (normative).
Annex B: justification of the test method (informative).

Practical applications and users

Who uses this standard:

Spinal implant manufacturers (design validation, product development)
Biomechanics and wear testing laboratories
Regulatory bodies and notified bodies reviewing preclinical performance data
R&D teams performing risk analysis and worst-case testing

Typical applications:

Preclinical wear and durability evaluation of lumbar disc replacements
Comparative testing of materials and designs under adverse kinematics
Supporting regulatory submissions and lifetime performance claims

Related standards

ISO 18192-1 - Loading/displacement parameters and environmental conditions for wear testing (lumbar)

ISO 4965-1 - Dynamic force calibration for uniaxial fatigue testing

ISO 23788 - Verification of alignment of fatigue testing machines

Keywords: ISO 18192-3:2017, impingement-wear testing, lumbar spinal disc prostheses, wear testing, spinal implant testing, total intervertebral spinal disc prostheses.

ISO 18192-3:2017 PDF

Abstract

Похожие стандарты

Overview - ISO 18192-3:2017 (Impingement-wear testing for lumbar disc prostheses)

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

ASTM STP153520120004

Comparison of Daily Motion of the Cervical and Lumbar Spine to ASTM F2423-11 and ISO 18192-1.2011 Standard Te…

ISO 4965:1979

Axial load fatigue testing machines — Dynamic force calibration — Strain gauge technique

BS ISO 23788:2012

Metallic materials. Verification of the alignment of fatigue testing machines.