ISO 18535:2016 PDF

Name: ISO 18535:2016 — Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
SKU: ISO 18535:2016
Price: 25 EUR
Availability: InStock

Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method

Название (английский):

ISO 18535:2016

Diamond-like carbon films — Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 12
Дата публикации:: 18 марта 2016 г.
Издание:: ISO IS 18535 edition 1 version 1
ICS:: 25.220.01

Тип поставки:

Full version180 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:180 €

Описание (английский):

ISO 18535:2016 specifies a procedure for and provides guidance on the determination of the coefficient of friction and the specific wear rate of diamond-like carbon (DLC) films. The method specifies that the materials are tested under dry conditions in pairs in a ball-on-disc configuration. The results of the tests are not applicable when DLC-coated parts operate in a lubricated environment.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 18535:2016 specifies a standardized ball-on-disc test method to determine the friction and wear characteristics of diamond-like carbon (DLC) films. The standard defines procedures and guidance for measuring the coefficient of friction and the specific wear rate of DLC coatings when tested under dry conditions in paired contacts (ball vs. disc). Results are not applicable to lubricated operating environments.

Key topics and technical requirements

Test configuration: Ball-on-disc arrangement (DLC-coated ball / DLC-coated disc / mixed pairs).

Specimen requirements

Ball: true sphere (recommended 6 mm diameter), surface roughness ≤ 0.1 µm Ra; sphericity per ISO 3290‑1/2.
Disc: thickness > 3 mm, flat/parallel within 0.02 mm, test circle ≥ 3 mm diameter, surface roughness ≤ 0.02 µm Ra.
DLC thickness: 0.01 µm to 10 µm.

Apparatus & measurement

Disc rotation drive with stable sliding speed and revolution counter.
Loading mechanism (weights, lever, hydraulic/pneumatic) to apply controlled normal load.
Friction measurement accuracy: ±1% of applied load (load cell, spring distortion, torque measurement).
Optional linear wear measurement sensitivity: 2.5 µm or better.
Environmental control: temperature ±2 °C and relative humidity 50% ±10 % (or chamber meeting these limits).

Typical test conditions (friction only)

Applied load: 3 N
Sliding speed: 0.05 m/s
Sliding distance: 200 m

Key definitions & calculations

Coefficient of friction μ = friction force / applied normal force.
Specific wear rate Ws = wear volume V / (applied force F × sliding distance L).

Specimen preparation & reporting

Ultrasonic cleaning, solvent rinse, oven drying and storage in test atmosphere.
Mandatory test report items and repeat counts as specified in the standard.

Applications and who uses it

DLC coating manufacturers for quality control and comparative performance testing.

Tribology laboratories and test houses performing friction and wear characterization.

Materials scientists, R&D teams and component designers evaluating DLC coatings for wear-prone applications (e.g., bearings, sliding contacts, MEMS).

OEMs specifying test methods for coatings where dry sliding performance is critical.

This method is ideal when application conditions are not fully defined and a repeatable, comparable measure of DLC tribological performance is required.

ISO 18535:2016 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

SIST ISO 3290-1:2015

Rolling bearings - Balls - Part 1: Steel balls

SIST EN ISO 1101:2017

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, locatio…

ISO 3274:1996/Cor 1:1998

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of conta…

SIST EN ISO 3611:2023

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characte…

ISO 4287:1997/Amd 1:2009

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface t…

SIST EN ISO 13385-1:2019

Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Design and metrological…

SIST EN ISO 80000-11:2020/A1:2026

Quantities and units - Part 11: Characteristic numbers - Amendment 1 (ISO 80000-11:2019/Amd 1:2025)