ISO 19986:2020 PDF

Name: ISO 19986:2020 — Lasers and laser-related equipment — Test method for angle resolved scattering
SKU: ISO 19986:2020
Price: 25 EUR
Availability: InStock

Lasers and laser-related equipment — Test method for angle resolved scattering

Название (английский):

ISO 19986:2020

Lasers and laser-related equipment — Test method for angle resolved scattering

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 11 декабря 2020 г.
Издание:: ISO IS 19986 edition 1 version 1
ICS:: 31.260

Тип поставки:

Full version210 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

This document describes procedures for the determination of the angle resolved scattering by optical components such as coated or uncoated optical elements, photonic structures, and materials that can be transparent, translucent, or opaque. It comprises scattering into the scattering sphere around the specimen usually separated into the backward and forward hemispheres. The procedures apply to wavelengths of radiation ranging from 5 nm in the extreme ultraviolet to 15 µm in the infrared spectral ranges.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 19986:2020 - Lasers and laser-related equipment - Test method for angle resolved scattering (ARS) defines a standardized test method to measure the angular distribution of radiation scattered from optical components. The scope covers coated and uncoated optics, photonic structures and materials that are transparent, translucent or opaque, across wavelengths from 5 nm (EUV) to 15 µm (IR). Results are reported as angle resolved scattering (ARS) and can be converted to BRDF/BTDF/BSDF or integrated to yield Total Scattering (TS).

Key Topics and Requirements

Measurement principle: ARS is measured by recording scattered radiant power as a function of polar and azimuthal angles using a detector with a finite aperture scanned over the scattering sphere (often via in‑plane detector scans).

Instrument functional sections: radiation source, beam preparation (spatial filter, attenuator, beam shaping), goniometer/scan mechanics, detection system (detector aperture, field lens), and specimen mount.

Geometry and origin: spherical coordinates referenced to specimen normal; origin location (entrance/exit surface or specimen) must be documented.

Wavelength range: applicable from 5 nm (EUV) to 15 µm (IR).

Environmental control: measurements should be performed in a cleanroom or under laminar flow to minimize dust-induced scatter (referenced ISO 14644‑1).

Calibration and alignment: procedures, including at least two calibration methods and instrument alignment steps, are specified; a reference channel is required if source drift or fluctuations exceed ~5% during calibration/measurement.

Data and uncertainty: procedures include ARS determination, conversion to BRDF/BTDF/BSDF, numerical integration to derive TS, and uncertainty considerations for meaningful metrology.

Documentation: specimen orientation, origin, illumination conditions, angular scan ranges and instrument signature must be recorded.

Applications

Quality control and acceptance testing of optical components (mirrors, lenses, coated surfaces).

Characterization of photonic structures, diffraction gratings, display foils and diffusers.

Stray light and stray‑radiation analysis in optical system design (input for ray- and wave‑based simulations).

Development and qualification of optics for deep‑UV, EUV and IR applications where scatter limits system performance.

Research labs and metrology centers performing high‑precision scattering measurements.

Related Standards

ISO 13696 - Total Scattering (TS) measurement methods and definitions

ISO 11145 - Optics and photonics vocabulary and symbols

ISO 14644‑1 - Cleanroom classification

ASTM E2387‑19 and SEMI ME1392 - other ARS measurement references

ISO 19986:2020 provides a practical, standardized framework for consistent, traceable ARS measurements that feed directly into optical design, quality assurance and stray‑light mitigation workflows.

ISO 19986:2020 PDF

Abstract

Похожие стандарты

Overview

Key Topics and Requirements

Applications

Who Should Use It

Related Standards

Технические детали

BS EN ISO 14644-13:2026

Cleanrooms and associated controlled environments. Cleaning of surfaces to achieve defined levels of cleanlin…

SIST EN ISO 13696:2022

Optics and photonics - Test method for total scattering by optical components (ISO 13696:2022)

BS EN ISO 11145:2018

Optics and photonics. Lasers and laser-related equipment. Vocabulary and symbols.