ISO 20506:2005 PDF

Name: ISO 20506:2005 — Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test
SKU: ISO 20506:2005
Price: 25 EUR
Availability: InStock

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test

Название (английский):

ISO 20506:2005

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 21 сентября 2005 г.
Издание:: ISO IS 20506 edition 1 version 1
ICS:: 81.060.30

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 20506:2005 specifies a method for the determination of in-plane shear strength of continuous-fibre-reinforced ceramic composites at ambient temperature by the Iosipescu test. Methods for test piece fabrication, testing modes and rates (load rate or displacement rate), data collection, and reporting procedures are addressed.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 20506:2005 specifies a standardized method to determine the in‑plane shear strength of continuous‑fibre‑reinforced ceramic composites (CFCC) at ambient temperature using the Iosipescu test. Intended mainly for advanced ceramic or glass‑matrix composites with 1‑D, 2‑D or 3‑D continuous fibre architectures, the standard defines test piece fabrication, fixture geometry, testing modes (load or displacement rate), data acquisition and reporting procedures for consistent material characterization and comparison.

Key topics and requirements

Test principle: Shear strength is measured on a rectangular flat strip with symmetric, centrally located V‑notches loaded in a modified asymmetric four‑point bending (Iosipescu) fixture; failure occurs by shear between notches.

Scope limits: Applies to continuous‑fibre‑reinforced composites; excludes discontinuous‑fibre, whisker‑reinforced or particulate‑reinforced ceramics.

Test piece & fixture:

Notched coupon geometry and alignment are specified; an alignment tool is recommended.
Fixture uses wedge‑action grips with a 13 mm unsupported span between halves.

Apparatus & measurement:

Testing machine verification per ISO 7500‑1, minimum grade 1.0.
Data acquisition: minimum 10 Hz sample rate (50 Hz response recommended); record load and cross‑head displacement.
Dimensional measurement: micrometers accurate to 0.01 mm; measure dimensions to within 0.02 mm.

Test modes: Options for displacement rate or load rate are provided; environmental conditions (humidity, temperature, inert atmospheres) and rate can influence results-especially for slow‑crack‑growth susceptible ceramics.

Interferences & validity:

Guidance on avoiding machining damage, excessive clamping, fixture friction, and invalid failures outside the gauge section.
Thin specimens (width/thickness ratio >10) can cause instability and invalid results.

Results & reporting:

Shear strength calculated from maximum shear load and shear area.
Statistical reporting expected (mean, standard deviation, coefficient of variation).
Test report content and test piece fabrication history should be documented.

Applications and users

ISO 20506:2005 is used for:

Material development and comparison of advanced ceramics and glass‑matrix composites.

Quality assurance and acceptance testing in manufacturing of CFCC components.

Generating design, reliability and characterization data for aerospace, energy, and high‑temperature applications. Primary users: materials laboratories, composite designers, quality engineers, researchers, and manufacturers of continuous‑fibre ceramic composites.

Related standards

ISO 7500‑1 (verification of testing machines)

ISO 3611 (micrometer callipers)

ASTM C1292 (basis for ISO 20506)

Keywords: ISO 20506:2005, Iosipescu test, in‑plane shear strength, continuous‑fibre‑reinforced ceramic composites, fine ceramics, test fixture, data acquisition, test piece preparation.

ISO 20506:2005 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

SIST EN ISO 7500-1:2018

Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compr…

SIST EN ISO 3611:2023

Geometrical product specifications (GPS) - Dimensional measuring equipment - Design and metrological characte…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies