ISO 2085:2018 PDF
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 3
- Дата публикации:
- 22 августа 2018 г.
- Издание:
- ISO IS 2085 edition 3 version 1
- ICS:
- 25.220.20
This document specifies a method for checking the continuity of thin anodic oxidation coatings on aluminium and its alloys by a copper sulfate contact test. The use of this method is limited to anodic oxidation coatings of thickness less than 5 µm or coatings that have been deformed, which includes those produced by coil anodizing techniques. NOTE The method described enables a rapid check to be made for the continuity of a thin coating of aluminium oxidation on aluminium and its alloys. In cases of doubt regarding a visible fault on the surface of a coating, the use of this method makes it possible to verify whether the fault corresponds to a local gap in the coating that exposes bare metal.
Abstract
Overview
ISO 2085:2018 specifies a rapid, practical method to check the continuity of thin anodic oxidation (anodized) coatings on aluminium and its alloys using a copper sulfate contact test. The procedure is intended for thin anodic coatings (less than 5 µm) or mechanically deformed coatings such as those produced by coil anodizing. The test helps verify whether visible surface faults are actual local gaps that expose bare aluminium.
Key Topics and Requirements
- Scope: Applicable to anodic oxidation coatings
Технические детали
- Технический комитет
- ISO/TC 79/SC 2 - Organic and anodic oxidation coatings on aluminium
- SKU
- ISO 2085:2018
Похожие стандарты
Другие стандарты ISO