ISO 21219-15:2023 PDF
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 15: Traffic event compact (TPEG2-TEC)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 80
- Дата публикации:
- 25 мая 2023 г.
- Издание:
- ISO IS 21219 edition 1 version 1
- ICS:
- 03.220.01
This document specifies the "traffic event compact" (TEC) TPEG application. The TEC application has been specifically designed to support information about traffic events (e.g. road works, traffic jams). A specific form of traffic event is local hazard warnings which, being safety-related messages, are sent with high priority to warn a driver of unexpected dangerous situations (e.g. black-ice, accident beyond curves, obstacles on road, etc.). Generally, the TEC application is designed to allow receivers to: — ensure travel safety for the driver; — enable the calculation of alternative routes; — avoid delays (e.g. traffic jams); — warn the driver of obstructions on route; and — provide the driver with information on infrastructural problems (e.g. closed petrol stations, non-functioning emergency telephones).
Abstract
Overview
ISO 21219-15:2023 - Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 15: Traffic event compact (TPEG2-TEC) specifies the TPEG2 Traffic Event Compact (TEC) application for exchanging concise, prioritized traffic-event messages. TEC is designed to convey events such as roadworks, traffic jams and local hazard warnings (e.g., black ice, obstacles, accidents) to support safety-critical and real-time traffic and travel information services.
Key topics and technical requirements
The standard defines the structure, semantics and encoding needed for interoperable TPEG2 TEC messages. Major technical topics include:
- Application constraints and signalling: rules for application identification, version signalling, ordered components and extensions to ensure consistent interpretation.
- TEC message structure: definitions of top-level components (e.g., TECMessage, MMCSwitch, MessageManagement) and event models.
- Event modelling: attributes for Event (effect, cause, start/stop time, length affected, speed attributes, rounding rules, at-grade junction closures).
- Location models: ProblemLocation, RestrictionLocation, SegmentLocation to precisely locate incidents and restrictions.
- Cause and advice coding: Cause, DirectCause, LinkedCause, Advice elements with rules and constraints.
- Traffic measures: VehicleRestriction, DiversionRoute, TemporarySpeedLimit and detailed handling for diversions and temporary limits.
- Datatypes and tables: standard datatypes (LaneNumber, RestrictionType, SegmentModifier, etc.) and code tables (effect codes, cause codes, warning levels, vehicle types, diversion types).
- Encodings and examples: normative annexes for TPEG-Binary and TPEG-ML representations and informative coding examples for implementers.
Practical applications and users
ISO 21219-15:2023 enables consistent delivery of compact traffic-event messages for a variety of ITS applications:
- Navigation & route-planning systems - automatically calculate alternative routes and avoid delays.
- In-vehicle infotainment and driver-assistance - present high-priority hazard warnings to enhance travel safety.
- Traffic data providers and broadcasters - encode and distribute standard TPEG2-TEC messages across networks.
- Traffic management centres and road operators - share event information (closures, roadworks, infrastructure failures) across systems.
- Mobile apps and fleet management - integrate concise, interoperable traffic event feeds for real-time operational decisions.
Related standards
- Part of the TPEG2 family and the ISO 21219 series (TPEG TTI standards). Implementers should align with other TPEG2 parts and national/regional ITS regulations when integrating TEC messages.
Keywords: ISO 21219-15:2023, TPEG2-TEC, traffic event compact, intelligent transport systems, TTI, traffic and travel information, hazard warnings, route planning, navigation systems, traffic data providers.
Технические детали
- Технический комитет
- ISO/TC 204 - Intelligent transport systems
- SKU
- ISO 21219-15:2023
Похожие стандарты
Упомянутые в описании и другие стандарты ISO
BS ISO 21219-15:2023
ДействующийIntelligent transport systems. Traffic and travel information (TTI) via transport protocol experts group, gen…
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…