ISO 21420:2020 PDF
Protective gloves — General requirements and test methods
Protective gloves — General requirements and test methods
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 24
- Дата публикации:
- 17 февраля 2020 г.
- Издание:
- ISO IS 21420 edition 1 version 1
- ICS:
- 13.340.40
This document specifies the general requirements and relevant test procedures for glove design and construction, innocuousness, comfort and efficiency, as well as the marking and information supplied by the manufacturer applicable to all protective gloves. It can also apply to arm protectors and gloves permanently incorporated in containment enclosures. Gloves and hand protectors such as mittens, pot holders and arm protection are covered by this document. This document does not address the protective properties of gloves and therefore is not used alone but only in combination with the appropriate specific standard(s). A non-exhaustive list of these standards is given in the Bibliography.
Abstract
Overview
ISO 21420:2020 - Protective gloves - General requirements and test methods is the ISO reference standard that sets out the general design, construction, innocuousness, comfort and marking requirements for all protective gloves. It applies to hand protectors such as mittens, pot holders, arm protectors and gloves permanently incorporated in containment enclosures. ISO 21420:2020 is a baseline standard and does not itself specify protective properties (e.g., cut, chemical or heat resistance); it is intended to be used in combination with relevant specific standards.
Key topics and technical requirements
ISO 21420 defines general requirements and test methods for glove safety, including:
- Design and construction: gloves must allow the wearer to perform tasks normally while providing appropriate protection; construction and seam strength must not significantly degrade overall performance. Reusable multilayer gloves must be doffable without layer separation.
- Innocuousness (material safety): materials shall not release substances known to be toxic, carcinogenic, mutagenic, allergenic, corrosive or irritating under foreseeable use.
- Specified material limits and tests:
- Chromium(VI) in leather:
Технические детали
- Технический комитет
- ISO/TC 94/SC 13 - Protective clothing
- SKU
- ISO 21420:2020
Похожие стандарты
Упомянутые в описании и другие стандарты ISO