ISO 21550:2004 PDF

Overview

ISO 21550:2004 - Photography - Electronic scanners for photographic images - Dynamic range measurements specifies standardized methods to measure and report the dynamic range of electronic scanners used with continuous-tone photographic media. The standard applies to both reflective (prints) and transmissive (film/transparency) scanners. Measurements are performed in the digital domain by scanning a prescribed test chart and analyzing the resulting data to determine the scanner Opto‑Electronic Conversion Function (Scanner OECF), incremental gain, noise and the ISO scanner dynamic range.

Keywords: ISO 21550:2004, dynamic range measurements, electronic scanners, Scanner OECF, photographic scanners, opto-electronic conversion function.

Key Topics

• Scope and applicability
  • Targets continuous‑tone photographic scanners; not intended for electronic still-picture cameras, video cameras, or bi‑tonal document scanners.
• Test chart requirements
  • Reflective chart recommended size ~100 × 150 mm; transparent (35 mm format) ~24 × 36 mm.
  • Includes ≥15 grey scale patches; lowest density ≤ 0.15, highest density ≥ 2.0 (visual densities per ISO 5-4).
  • Reflective targets should provide a density range of at least 1.8.
  • Fiducial marks and administrative elements are recommended for automated analysis and traceability.
• Measurement procedures
  • Defines test conditions (temperature/humidity per ISO 554), luminance/colour measurement needs, and scanner settings.
  • Measures the Scanner OECF (input density vs digital output), incremental gain function, and incremental signal‑to‑noise ratio.
  • Specifies calculation of ISO scanner dynamic range (density span where incremental gain exceeds 0.5 and the minimum unclipped density).
• Results and presentation
  • Guidance on presenting OECF curves, dynamic range values, and noise/SNR data. Normative annexes provide patch specifications and density-shift procedures.

Applications

• Manufacturers of film and reflection scanners for design validation and specification claims.
• Test laboratories and quality assurance teams performing objective image‑quality characterization.
• Photofinishing, professional imaging and graphic arts purchasers who need standardized dynamic range metrics for procurement or comparative evaluation.
• R&D groups developing sensors, optics or image processing where measured OECF and noise characteristics inform improvements.

Related standards

• ISO 5-2, ISO 5-4 (density measurements)
• ISO 554 (standard atmospheres)
• ISO 12231, ISO 12232:1998 (camera terminology and ISO speed)
• ISO 14524 (OECF measurement methods)
• IEC 61966-8 (flare measurement reference)

ISO 21550:2004 provides repeatable, comparable procedures to quantify scanner dynamic range and related image‑quality metrics, enabling reliable specification and benchmarking of photographic scanners.