ISO 21663:2020 PDF

Name: ISO 21663:2020 — Solid recovered fuels — Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method
SKU: ISO 21663:2020
Price: 25 EUR
Availability: InStock

Solid recovered fuels — Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method

Название (английский):

ISO 21663:2020

Solid recovered fuels — Methods for the determination of carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) by the instrumental method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 12
Дата публикации:: 24 ноября 2020 г.
Издание:: ISO IS 21663 edition 1 version 1
ICS:: 75.160.10

Тип поставки:

Full version180 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:180 €

Описание (английский):

This document specifies the determination of total content of carbon, hydrogen, nitrogen and sulfur in solid recovered fuels by instrumental method. Depending on the amount of test portion, micro or macro instrumental apparatus are used. This method is applicable for concentrations on dry matter basis of C > 0,1 %, N > 0,1 %, H > 0,1 % and S > 0,05 %.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 21663:2020 specifies an instrumental method for the determination of total carbon (C), hydrogen (H), nitrogen (N) and sulphur (S) in solid recovered fuels (SRF). The standard covers both micro (milligram test portions) and macro (gram test portions) instrumental apparatus, and is applicable on a dry-matter basis for concentrations of C > 0.1%, H > 0.1%, N > 0.1% and S > 0.05%. The method is based on complete combustion of a known sample mass and quantitative gas analysis of the combustion products (CO2, H2O, N2/NOx, SOx).

Key Topics and Requirements

Principle: Oxidative combustion of the SRF sample (typical furnace temperature ≈ 1 250 °C) with catalytic conversion and subsequent instrumental gas analysis.

Micro vs. macro methods: Choice of apparatus depends on test‑portion mass (micro: mg, macro: g); micro methods require very careful sample preparation.

Sample preparation:

Laboratory sample → general analysis sample → test portion
Nominal top size of the test sample: ≤ 1 mm (finer sizes may be required for some instruments)
Moisture determination (if analysis is on dry basis) per ISO 21660‑3
Storage and conservation guidance in Annex A

Apparatus and reagents:

Carrier gas (e.g., helium 99.99% v/v) and oxygen (≥ 99.95% v/v) or instrument‑specified purities
Combustion tube, catalysts, detectors and a balance with at least 0.1% resolution
Tungsten wire must not be used for sulfur determination (it acts as a sulfur trap); copper wire is suggested as an alternative

Calibration and standards:

Use of pure organic calibration standards (e.g., acetanilide, BBOT) and control biomass materials (examples: alfalfa, oatmeal, flours) with traceable values

Quality and performance:

Conversion of NOx to N2, conversion of S and halide-associated hydrogen to H2O, and detector linearity/response characteristics are addressed
Precision, robustness and reporting requirements are defined (see clauses on performance characteristics and test report)

Applications and Users

Practical for labs performing CHNS analysis of SRF for regulatory reporting, quality control, fuel characterization and calorific value estimation.

Primary users: analytical testing laboratories, waste-to-energy facilities, SRF producers, environmental laboratories and regulatory bodies assessing fuel composition and compliance.

Useful for process optimization, emissions estimation and material specification in recycling and energy recovery operations.

Related Standards

ISO 21637 - Terminology and definitions for SRF

ISO 21660‑3 - Moisture determination (oven dry method) for general analysis samples

ISO 21646 - Sample preparation for solid recovered fuels

Keywords: ISO 21663:2020, solid recovered fuels, SRF, CHNS analysis, carbon hydrogen nitrogen sulphur, instrumental method, combustion analysis, sample preparation, calibration standards.

ISO 21663:2020 PDF

Abstract

Похожие стандарты

Overview

Key Topics and Requirements

Applications and Users

Related Standards

Технические детали

SIST EN ISO 21660-3:2021

Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in gen…

SIST EN ISO 21637:2021

Solid recovered fuels - Vocabulary (ISO 21637:2020)

SIST EN ISO 21646:2022

Solid recovered fuels - Sample preparation (ISO 21646:2022)