ISO 22553-14:2021 PDF

Name: ISO 22553-14:2021 — Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour
SKU: ISO 22553-14:2021
Price: 25 EUR
Availability: InStock

Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour

Название (английский):

ISO 22553-14:2021

Paints and varnishes — Electro-deposition coatings — Part 14: Deposition behaviour

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 5
Дата публикации:: 9 марта 2021 г.
Издание:: ISO IS 22553 edition 1 version 1
ICS:: 87.040

Тип поставки:

Full version75 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:75 €

Описание (английский):

This document specifies a method for determining the deposition behaviour of an electro-deposition coating (e-coat) on various substrates and with various pre-treatments. It applies to electro-deposition coatings for automotive industries and other general industrial applications, e.g. chiller units, consumer products, radiators, aerospace, agriculture.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 22553-14:2021 - Paints and varnishes - Electro-deposition coatings - Part 14: Deposition behaviour specifies a laboratory method to determine the deposition behaviour of electro‑deposition coatings (e-coats) on different substrates and after various pre-treatments. The standard is intended for automotive and general industrial applications (e.g., chillers, consumer products, radiators, aerospace, agriculture) and defines how to run controlled e-coating trials and record resulting film thickness and surface quality.

Key topics and requirements

Principle: Immerse a test panel and a counter‑electrode in a laboratory deposition tank and coat at specified voltages, bath temperatures and times; measure dry film thickness for each condition.

Apparatus: laboratory deposition tank with circulation, DC power supply, agitator or pump, oven for curing. Measurement devices include a dry film thickness gauge (max error 0.3 µm), thermometer (±0.1 °C) and stopwatch.

Test panels: conductive panels prepared per ISO 1514, ~190 × 105 × 0.75 mm, with defined pre‑treatment.

Operating parameters: set bath temperature (typically 25–35 °C), control to ±0.5 °C for deposition; select voltage/time to reach nominal dry film thickness; rinse with demineralized water per ISO 23321 and cure at object‑appropriate temperatures (commonly 100–180 °C).

Measurement and evaluation: measure dry film thickness at five points per zone (per ISO 2808) and record mean values for combinations of voltage and bath temperature. Visually inspect for surface defects (e.g., pitting).

Reporting: report identification of coating, reference to ISO 22553-14:2021, bath voltage/temperature, deposition times (ramp and hold), curing temperature/time, measured thickness results, deviations, anomalies and test date.

Reproducibility: the standard notes that precision (fidelity) data are not currently available.

Practical applications

Use ISO 22553-14 to:

Characterize how an e-coat deposits under varying voltages and temperatures.
Compare coatings, substrates or pre-treatment processes during R&D.
Set production targets for bath voltage and cure conditions to achieve required film thickness.
Support quality control and failure investigation by documenting deposition behaviour and surface defects.

Related standards

ISO 1514 (test panels)

ISO 2808 (film thickness measurement methods)

ISO 4618 (terms and definitions)

ISO 22553-1 (e-coat vocabulary)

ISO 23321 (demineralized water for industrial use)

Keywords: ISO 22553-14:2021, electro-deposition, deposition behaviour, e-coat testing, e-coating, paints and varnishes, film thickness measurement, automotive coatings.

ISO 22553-14:2021 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Practical applications

Who should use this standard

Related standards

Технические детали

BS ISO 15142-3:2003

Implants for surgery. Metal intramedullary nailing systems. Connection devices and reamer diameter measuremen…

SIST EN ISO 23321:2021

Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test…

SIST EN ISO 28080:2021

Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)

SIST EN ISO 22553-14:2022

Paints and varnishes - Electro-deposition coatings - Part 14: Deposition behaviour (ISO 22553-14:2021)

SIST EN ISO 4618:2023

Paints and varnishes - Vocabulary (ISO 4618:2023)

BS EN ISO 22553-10:2023

Paints and varnishes. Electro-deposition coatings. Edge protection.