ISO 22733-1:2021 PDF
Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 1: Car-to-car
Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 1: Car-to-car
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Количество страниц:
- 18
- Дата публикации:
- 23 июля 2021 г.
- Издание:
- ISO IS 22733 edition 1 version 1
- ICS:
- 43.040.40
This document specifies a method to evaluate the behaviour of a vehicle equipped with an autonomous emergency braking system (AEBS), or dynamic brake support (DBS) during several accident scenarios. Those accidents occur during a straight-line driving when the vehicle under test (VUT) approaches another vehicle in the same lane. Both vehicles are aligned in longitudinal axis to each other. The most important part of the vehicle behaviour during these accidents scenarios is the capacity to avoid or mitigate the collision. Systems requiring driver intervention are not in the scope of this document. NOTE Depending on accidentology, only a part of the scenarios can be used for an evaluation of performance. AEB system evaluation based upon this document is limited to longitudinal accident scenarios.
Технические детали
- Технический комитет
- ISO/TC 22/SC 33 - Vehicle dynamics and chassis components
- SKU
- ISO 22733-1:2021
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…