ISO 22915-11:2011 PDF

Name: ISO 22915-11:2011 — Industrial trucks — Verification of stability — Part 11: Industrial variable-reach trucks
SKU: ISO 22915-11:2011
Price: 25 EUR
Availability: InStock

Industrial trucks — Verification of stability — Part 11: Industrial variable-reach trucks

Название (английский):

ISO 22915-11:2011

Industrial trucks — Verification of stability — Part 11: Industrial variable-reach trucks

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 28 октября 2011 г.
Издание:: ISO IS 22915 edition 1 version 1
ICS:: 53.060

Тип поставки:

Full version90 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:90 €

Описание (английский):

ISO 22915-11:2011 specifies tests for verifying the stability of industrial variable-reach trucks, equipped either with fork arms or with load-handling attachments. It is not applicable to those trucks designed for handling freight containers; nor is it applicable to rough-terrain variable-reach trucks, which are covered by ISO 22915‑14.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 22915-11:2011 - Industrial trucks - Verification of stability - Part 11: Industrial variable-reach trucks - specifies test methods to verify the static and dynamic stability of industrial variable-reach trucks (telescopic or articulating booms). The standard applies to counterbalanced variable-reach trucks used on firm, level surfaces and covers trucks equipped with fork arms or load‑handling attachments. It explicitly excludes trucks designed for freight container handling and rough‑terrain variable‑reach trucks (covered by ISO 22915‑14).

Keywords: ISO 22915-11, industrial trucks, variable-reach trucks, stability verification, tilt-table tests, load-handling attachments

Key Topics

Scope and definitions

Defines “variable‑reach truck” and “industrial variable‑reach truck” (non‑rough terrain, limited slewing ≤5°).
References related terminology standards (ISO 5053).

Verification tests

Establishes five stability verification tests (Tests 1–5) that cover longitudinal and lateral stability, travel and stacking/retrieving modes, and worst‑case lift/reach combinations.
Specifies positioning of truck on a tilt table (load/drive axle and steer axle orientation, turning positions, and special placements for articulating chassis or axle locking).

Test conditions and loads

Test loads are applied in the least stable lift/reach configurations; Test 5 requires checks at maximum and minimum boom extension and maximum boom angle.
Lift height for travel simulations: 300 mm above the tilt table for trucks ≤10 t rated capacity; 500 mm for >10 t.

Devices and configurations

Procedures require tests both with and without stabilizers, axle‑locking or lateral frame‑levelling devices where fitted.

Acceptance and marking

Results determine operating capacities. The capacity under the tested operating condition (with stabilizers/axle locking engaged and disengaged) must be marked on an information plate visible to the operator, per ISO 3691‑2.

Tilt‑table criteria

Tilt angles and pass/fail criteria are defined in the standard (including formulas depending on rated capacity and maximum travel speed, e.g., expressions of the form (15 + 1.4v)% are used).

Applications

Manufacturers of variable‑reach trucks use ISO 22915‑11 to prove stability during design validation and type testing.

Test laboratories perform tilt‑table and load tests to certify truck safety and compliance.

Fleet managers, safety engineers and compliance officers reference the standard to assess safe operating limits, marking requirements and recommended procedures for trucks fitted with stabilizers or axle‑locking systems.

Useful in procurement specifications when requiring certified stability testing for industrial telescopic handlers and reach trucks.

Related Standards

ISO 22915‑1 - Industrial trucks - Verification of stability - Part 1: General

ISO 3691‑2 - Industrial trucks - Safety requirements and verification - Part 2: Self‑propelled variable‑reach trucks

ISO 5053 - Powered industrial trucks - Terminology

ISO 22915‑14 - Rough‑terrain variable‑reach trucks (for off‑road machines)

For detailed test parameters, tilt‑table placements, and numeric acceptance values refer directly to ISO 22915‑11:2011 and the referenced parts.

ISO 22915-11:2011 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

BS ISO 22915-14:2010

Industrial trucks. Verification of stability. Rough-terrain variable-reach trucks.

BS ISO 22915-11:2011

Industrial trucks. Verification of stability. Industrial variable-reach trucks.

ISO 5053:1987

Powered industrial trucks — Terminology

SIST EN ISO 3691-2:2023

Industrial trucks - Safety requirements and verification - Part 2: Self-propelled variable-reach trucks (ISO…

BS ISO 22915-15:2020

Industrial trucks. Verification of stability. Counterbalanced trucks with articulated steering.