ISO 22915-24:2015 PDF

Name: ISO 22915-24:2015 — Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks
SKU: ISO 22915-24:2015
Price: 25 EUR
Availability: InStock

Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks

Название (английский):

ISO 22915-24:2015

Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 5 августа 2015 г.
Издание:: ISO IS 22915 edition 1 version 1
ICS:: 53.060

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

ISO 22915-24:2015, together with ISO 22915‑1, specifies the tests for verifying the stability of slewing variable-reach rough-terrain trucks (hereafter also referred to as trucks), equipped with fork arms or with load carrying or non-load carrying attachments. It is not applicable to those trucks equipped with the following: - integrated and non-integrated personnel work platforms; - tracks; - equipment to operate on rails.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 22915-24:2015 (Slewing variable-reach rough‑terrain trucks)

ISO 22915-24:2015 is part of the ISO 22915 series for verification of stability of industrial trucks. Used together with ISO 22915-1, this part specifies the static test procedures and acceptance criteria for slewing variable‑reach rough‑terrain trucks equipped with fork arms or load/non‑load carrying attachments. It excludes trucks fitted with personnel work platforms, tracks, or rail‑operation equipment.

Key goals:

Verify resistance to overturning under controlled static conditions

Account for practical dynamic influences (weight distribution, boom deflection, tyre/axle behaviour)

Provide test prescriptions for trucks on wheels and on stabilizers

Key technical topics and requirements

Tipping lines and reference planes: Defines tipping lines for trucks on wheels (non‑oscillating and oscillating axles) and for trucks on stabilizers/outriggers. Tests reference the longitudinal centre plane of chassis and upper structure.

Tilt‑table test matrix (Tests T1–T5): Specifies positioning of truck relative to tilt axis for longitudinal, lateral and travel simulations. Tests include stacking/retrieving, travelling and boom/extension configurations in the least stable combinations.

Test load and lift height: Tests require the load to be positioned at the least stable lift/reach combination. For travel simulations (T2/T4) fork face height is specified (e.g., 500 mm above ground in this standard).

Lateral slope correction and chassis levelling: Trucks with chassis levelling may use maximum lateral slope correction up to 7 % for specified tests; other tests prohibit lateral slope correction.

Oscillating vs non‑oscillating axle modes: Where applicable, tests are run in both axle modes and tipping lines are adjusted accordingly.

Stabilizer tests and safety factor: For trucks on stabilizers, the measured actual capacity at the least stable boom configuration shall not exceed 80 % (safety coefficient 1.25) of the minimum load causing instability. Any additional capacity from stabilizers or levelling must be shown on the load chart.

Marking and load charts: Annex provides example load charts and requires marking of additional capacities determined during stability tests.

Practical applications - who uses this standard

Manufacturers and OEM design engineers validating stability of rough‑terrain variable‑reach trucks

Test laboratories and conformity assessment bodies performing tilt‑table and stabilizer tests

Fleet safety managers, procurement and compliance teams assessing machine suitability and load charts

Regulators and standards committees referencing harmonized stability verification methods

Related standards

ISO 22915‑1 - Industrial trucks - Verification of stability - General

ISO 5053‑1 - Powered industrial trucks - Terminology and classification

ISO 10896‑2 - Rough terrain trucks - Safety requirements - Slewing variable‑reach trucks

For safe application and certification, consult the full ISO 22915‑24:2015 document and associated parts for complete procedures, figures and normative tables.

ISO 22915-24:2015 PDF

Abstract

Похожие стандарты

Overview - ISO 22915-24:2015 (Slewing variable-reach rough‑terrain trucks)

Key technical topics and requirements

Practical applications - who uses this standard

Related standards

Технические детали

BS ISO 22915-15:2020

Industrial trucks. Verification of stability. Counterbalanced trucks with articulated steering.

ISO 5053:1987

Powered industrial trucks — Terminology

ISO 10896-2:2016

Rough-terrain trucks — Safety requirements and verification — Part 2: Slewing trucks