ISO 23130:2020 PDF
Milking and cooling machine installations — Monitoring device for bulk milk cooling tanks — Requirements
Milking and cooling machine installations — Monitoring device for bulk milk cooling tanks — Requirements
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 6
- Дата публикации:
- 28 сентября 2020 г.
- Издание:
- ISO IS 23130 edition 1 version 1
- ICS:
- 65.040.10
This document specifies minimum performance and information requirements for monitoring devices of bulk milk cooling tanks as part of milking and milk cooling machinery installations in agricultural operations. It also specifies the minimum requirements for materials, design and installation. The purpose of this document is to contribute to a high-quality milk production by monitoring, collecting data and providing alarms with respect to defined parameters of the milk cooling, storage and cleaning processes.
Abstract
Overview - ISO 23130:2020 for bulk milk tank monitoring
ISO 23130:2020 defines minimum performance, design and information requirements for monitoring devices of bulk milk cooling tanks used in milking and cooling machine installations. The standard aims to improve milk quality and food safety by specifying how monitoring devices must measure, record, alarm and report on milk cooling, storage, agitation and cleaning processes in agricultural operations.
Key topics and technical requirements
- Scope & compliance
- Applies to monitoring devices as part of milking and milk cooling installations and to retrofit devices.
- Devices provided by equipment manufacturers must be included in the installation’s conformity procedure; retrofitters must ensure compatibility and legal compliance.
- Materials & design
- Materials shall comply with ISO 5708.
- Devices must indicate operational status, be protected against unauthorized modification, and be able to transfer data to external equipment (PC, USB, etc.).
- Temperature sensors for monitoring must be independent of control sensors or use dual sensors in integrated controllers.
- Measurement accuracy
- ±0.5 °C for 0 °C to 20 °C
- ±1.0 °C for >20 °C to
Технические детали
- Технический комитет
- ISO/TC 23 - Tractors and machinery for agriculture and forestry
- SKU
- ISO 23130:2020
Похожие стандарты
Упомянутые в описании и другие стандарты ISO
ISO 5708:1983
ДействующийRefrigerated bulk milk tanks
Overview ISO 5708:1983, developed by the International Organization for Standardization (ISO), specifies requirements for the design, construction, and performance of refrigerated bulk milk tanks. Th…
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…