ISO 23766:2022 PDF

Name: ISO 23766:2022 — Thermal insulating products for industrial installations — Determination of the coefficient of linear thermal expansion at sub-ambient temperatures
SKU: ISO 23766:2022
Price: 25 EUR
Availability: InStock

Thermal insulating products for industrial installations — Determination of the coefficient of linear thermal expansion at sub-ambient temperatures

Название (английский):

ISO 23766:2022

Thermal insulating products for industrial installations — Determination of the coefficient of linear thermal expansion at sub-ambient temperatures

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 14 марта 2022 г.
Издание:: ISO IS 23766 edition 1 version 1
ICS:: 91.100.60

Тип поставки:

Full version135 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:135 €

Описание (английский):

This document specifies the equipment and procedures for determining the coefficient of linear thermal expansion at sub-ambient temperatures (−196 °C to 25 °C), subject to the possible temperature limitation of the test specimens. It is not applicable to products which experience dimensional changes during the test due to the loss of hydration water or which undergo other phase changes.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 23766:2022 specifies laboratory equipment and procedures for determining the coefficient of linear thermal expansion (CLTE) of thermal insulating products for industrial installations at sub‑ambient temperatures (−196 °C to 25 °C). The standard covers test methods, specimen preparation, conditioning, measurement accuracy and reporting. It excludes products that change dimension due to loss of hydration water or other phase changes during the test.

Key topics and technical requirements

Scope & limits: Test range from −196 °C to 25 °C; subject to specimen temperature limits. Not applicable to materials with phase-change or dehydration‑induced dimensional changes.

Two measurement methods:

Method A - Optical method (optical dilatometry): uses an InGaN‑based light source and collimator lens to project a parallel planar beam (parallelism within 2″ ≈ 0.009696 mrad) across a specimen (typically 10–30 mm). A detector and digital edge‑detection processor measure length changes.
Method B - Displacement method: uses a displacement sensor (reading to 1 µm) to record dimensional change; special loading rules apply for soft products.

Apparatus & environment:

Test chamber and cooling system capable of controlled cooling (liquid nitrogen commonly used) and maintaining specimen mean temperature within ±0.5 K (optical) or ±1 K (displacement) of target.
Cooling rate limits (e.g., ≤1 °C/min between setpoints; conservative limits for last 50 °C) and temperature stabilization (typical hold ≈30 min) to ensure uniform specimen temperature.
Temperature measurement: calibrated thermocouples/temperature sensors with ±0.5 K accuracy; minimum three sensors recommended for displacement tests to determine mean specimen temperature.

Specimen prep & conditioning:

Typical specimen shapes: cylinder or cuboid; remove skins/facings; sawn or cut with thin‑walled steel tube.
Conditioning: at least 6 h at (23 ±5) °C (or (23 ±2) °C and 50 ±5 % RH if disputed); tropical option (27 ±5 °C, 65 ±5 % RH).

Data handling: Record continuous length/temperature curves, report reversible changes; repeat cycles until only reversible change remains. Calculate CLTE from reversible readings.

Applications and users

Practical for manufacturers, test laboratories, material scientists, quality engineers and specifiers working with cryogenic and low‑temperature insulation (e.g., LNG, cryogenic piping, industrial refrigeration).

Use cases: product R&D, conformity testing, acceptance testing, product comparison, and design input for thermal strain and stress analyses in cryogenic systems.

Related standards

ISO 18099 - Coefficient of thermal expansion (general method)

ISO 9229 - Thermal insulation - Vocabulary

Keywords: ISO 23766:2022, coefficient of linear thermal expansion, thermal insulating products, sub‑ambient temperatures, optical dilatometry, displacement method, liquid nitrogen, cryogenic insulation, thermal expansion testing.

ISO 23766:2022 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

BS EN ISO 18099:2022

Thermal insulating products for building equipment and industrial installations. Determination of the coeffic…

SIST EN ISO 9229:2020

Thermal insulation - Vocabulary (ISO 9229:2020)

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies