ISO 24033:2009 PDF

Name: ISO 24033:2009 — Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength
SKU: ISO 24033:2009
Price: 25 EUR
Availability: InStock

Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength

Название (английский):

ISO 24033:2009

Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 7 января 2009 г.
Издание:: ISO IS 24033 edition 2 version 1
ICS:: 23.040.20

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

ISO 24033:2009 specifies minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on pipes made of: polyethylene of raised temperature resistance (PE-RT) type I; and PE-RT type II.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 24033:2009 (PE-RT pipes)

ISO 24033:2009 specifies how to determine the expected long‑term strength of pipes made from polyethylene of raised temperature resistance (PE‑RT) types I and II as a function of time and temperature. The standard provides reference lines - mathematical relationships between time, temperature (K) and hoop stress (MPa) - and tabulated values for use in strength and lifetime calculations for PE‑RT piping materials. Type II PE‑RT (extended in this edition) is noted for higher hoop‑stress performance at elevated temperatures (up to 110 °C).

Key topics and technical requirements

Reference lines and equations: Logarithmic equations relate time to fracture (hours) with temperature and hoop stress. These reference lines are used for interpolation and controlled extrapolation.

Material coverage: PE‑RT type I (reference lines valid 20 °C–95 °C) and type II (20 °C–110 °C).

Tabulated expected strengths: Table 2 provides hoop stress (MPa) values for specific times and temperatures (no design safety factors included).

Extrapolation limits: Based on an Arrhenius model with an activation energy of 110 kJ/mol, the standard gives extrapolation factors (K) from 110 °C to lower temperatures (e.g., K = 100 acceptable up to 50 °C).

Conformity testing: Annex A requires testing per ISO 1167‑1 and ISO 1167‑2 at specified temperatures and time intervals, with at least three failure times in each interval and at least 97.5% of results on or above the reference line. For type II, tests must show no brittle‑failure knee up to 110 °C within 8 760 h.

Normative references: ISO 1167‑1/‑2 (pressure‑failure tests), ISO 9080 (long‑term hydrostatic strength extrapolation), ISO 1043‑1 (polymer terminology).

Practical applications and users

Who uses ISO 24033:2009:

Pipe and material manufacturers validating long‑term hydrostatic performance of PE‑RT compounds

Product qualification and certification bodies demonstrating conformity to reference lines

Design engineers and specifiers calculating allowable hoop stress and service life for hot‑water and raised‑temperature piping systems

Test laboratories performing long‑term pressure/creep‑rupture testing

Typical applications:

Hot and cold water distribution and heating systems where raised temperature resistance is required

Material selection and lifetime prediction during product development and quality control

Related standards

ISO 1167‑1 / ISO 1167‑2 - test methods for resistance to internal pressure

ISO 9080 - long‑term hydrostatic strength extrapolation

ISO 1043‑1 - polymer abbreviations and terms

Keywords: ISO 24033:2009, PE‑RT, polyethylene of raised temperature resistance, reference lines, expected strength, hoop stress, long‑term hydrostatic strength, ISO 1167.

ISO 24033:2009 PDF

Abstract

Похожие стандарты

Overview - ISO 24033:2009 (PE-RT pipes)

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

SIST EN ISO 1167-1:2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance…

SIST EN ISO 1167-2:2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance…

SIST EN ISO 9080:2012

Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics m…

ISO 1043-1:2011/Amd 1:2016

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics — Amendme…

SIST EN ISO 1167-4:2008

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance…