ISO 24160:2022 PDF

Name: ISO 24160:2022 — Refuse collection vehicles — Waste odour and leachate prevention and control
SKU: ISO 24160:2022
Price: 25 EUR
Availability: InStock

Refuse collection vehicles — Waste odour and leachate prevention and control

Название (английский):

ISO 24160:2022

Refuse collection vehicles — Waste odour and leachate prevention and control

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 10
Дата публикации:: 27 мая 2022 г.
Издание:: ISO IS 24160 edition 1 version 1
ICS:: 43.160

Тип поставки:

Full version150 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:150 €

Описание (английский):

This document specifies methods for preventing the spread of waste odour and the leakage of leachate during the collection and transportation of waste in refuse collection vehicles (RCVs), when the control of the spread of waste odour and leakage of leachate is required in order to protect the surrounding environment. This document is not applicable in cases when it is not necessary to provide control of waste odour or leachate due to the composition or packaging of waste and there is no influence on the environment due to the loaded waste.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

ISO 24160:2022 - Overview

ISO 24160:2022 specifies methods to prevent and control waste odour and leachate emissions from refuse collection vehicles (RCVs). It applies when odour and leachate control is required to protect the surrounding environment and is intended for vehicle manufacturers, fleet owners, waste service providers, maintenance teams and regulators. The standard gives practical structural and operational guidance for RCV bodies, hoppers, leachate tanks and openings to minimize environmental impact and nuisance complaints.

Key topics and technical requirements

Structural design for leachate management

Body bottoms shall be sloped or shaped so leachate flows to drainage holes and into leachate tank(s).
Drainage hole diameter: minimum 8 mm to reduce clogging.
Leachate tank capacity and location must prevent overflow during collection while meeting constraints such as ground clearance, vehicle width and axle loads.

Leakage and scattering prevention

Discharge openings on leachate tanks and bodies should remain closed and be sealed with covers or valves during operation to avoid leaks.
Use leachate-scattering prevention devices (examples: rubber sheets at hopper tips) to stop splashing when waste is pushed from hopper to body.

Odour control

Openings for body maintenance and load openings must include sealing materials (doors, covers, sheets) to minimize odour escape.
Load openings can be fitted with flaps/doors or a ventilation system that maintains an air pressure lower than ambient in the loading area. Exhaust air from ventilation systems must be filtered to eliminate waste odour.

Maintenance and documentation

Instruction manuals shall specify recommended timing for replacement of sealants and other maintenance measures to prevent odour and leachate escape as materials deteriorate.

Supporting illustrations

Annex A provides example figures and names of parts (doors, covers, leachate tank placements, hopper rubber sheets).

Practical applications and users

Vehicle manufacturers use ISO 24160:2022 to design RCV bodies, hoppers and integrated leachate tanks that meet odour and leakage prevention expectations.

Municipal and private waste service providers apply the standard to reduce public complaints, protect water quality and meet local environmental requirements.

Maintenance providers and fleet managers follow the standard’s maintenance and documentation guidance to prevent seal failures and leaks.

Regulators and consultants reference the standard when setting procurement criteria, compliance checks and environmental mitigation plans.

ISO 24160:2022 PDF

Abstract

Похожие стандарты

ISO 24160:2022 - Overview

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

SIST EN ISO 24161:2024

Waste collection and transportation management - Vocabulary (ISO 24161:2022)

PD ISO/TS 24159:2022

Refuse collection vehicles. Safety of manual and rear-loaded refuse collection vehicles

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies