ISO 24334:2019 PDF

Laminate floor coverings — Determination of locking strength for mechanically assembled panels

Название (английский):

ISO 24334:2019

Laminate floor coverings — Determination of locking strength for mechanically assembled panels

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 29 июля 2019 г.
Издание:: ISO IS 24334 edition 3 version 1
ICS:: 97.150

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This document specifies a method for determination of the locking strength of joints between laminate floor covering panels which are assembled with both vertical and horizontal mechanical locking systems. NOTE This method is also applicable to other mechanically assembled panels, e.g. modular multilayer floorings.

Технические детали

Технический комитет: ISO/TC 219 - Floor coverings
SKU: ISO 24334:2019

Abstract

Overview

ISO 24334:2019 specifies a laboratory method to determine the locking strength of mechanically assembled laminate floor covering panels. It covers joints assembled with both vertical and horizontal mechanical locking systems and is also applicable to other mechanically assembled panels (for example, modular multilayer floorings). The test pulls joined panels apart to a defined opening (0.20 mm) or until the joint breaks, and reports locking strength normalized to panel width (kN/m).

Key topics and technical requirements

Scope & principle: Measures joint resistance by pulling panels apart perpendicular to the lock until 0.20 mm opening or failure.
Sampling & conditioning: Use five panels (short- and long-side specimens), conditioned to constant mass at (50 ± 5)% RH and (23 ± 2) °C. Constant mass = two weighings 24 h apart within 0.1% mass difference.
Specimen preparation:
- Short-side specimens: cut A1 and B1 (length ≥ 110 mm); width rules depend on panel width (gluing or trimming specified).
- Long-side specimens: cut A2 and B2 (length 200 ± 10 mm; width ≥ 110 mm); glue panels if width

Overview

Key topics and technical requirements

Scope & principle: Measures joint resistance by pulling panels apart perpendicular to the lock until 0.20 mm opening or failure.
Sampling & conditioning: Use five panels (short- and long-side specimens), conditioned to constant mass at (50 ± 5)% RH and (23 ± 2) °C. Constant mass = two weighings 24 h apart within 0.1% mass difference.
Specimen preparation:
- Short-side specimens: cut A1 and B1 (length ≥ 110 mm); width rules depend on panel width (gluing or trimming specified).
- Long-side specimens: cut A2 and B2 (length 200 ± 10 mm; width ≥ 110 mm); glue panels if width

ISO 24334:2019 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

Standard Practice for Dosimetry in Radiation Processing

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

Additive Manufacturing — Round Robin Testing — General Guidelines

Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts