ISO 2528:2017 PDF
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 20
- Дата публикации:
- 13 октября 2017 г.
- Издание:
- ISO IS 2528 edition 3 version 1
- ICS:
- 85.060
ISO 2528:2017 specifies a method for the determination of the water vapour transmission rate (often erroneously called "permeability") of sheet materials. This method is not generally recommended for use if the transmission rate is expected to be less than 1 g/m2 per day or for materials thicker than 3 mm. In such cases the method specified in ISO 9932 is preferred. The method cannot be applied to film materials that are damaged by hot wax or that shrink to an appreciable extent under the test conditions used. For some purposes it may be necessary to determine the transmission rate of creased material; a procedure for this is given in Annex A.
Abstract
Overview
ISO 2528:2017 defines the gravimetric (dish) method for measuring the water vapour transmission rate (WVTR) of sheet materials. Often miscalled “permeability,” WVTR is the mass of water vapour transmitted through a unit area in a unit time, typically expressed in g/(m²·d). The method uses dishes containing a desiccant sealed by the test material and records mass gain over time in a controlled atmosphere to calculate WVTR.
Key topics and technical requirements
- Scope & limitations
- Intended for sheet materials such as paper, board, plastic films, laminates and coated fabrics.
- Not generally recommended if expected WVTR
Технические детали
- Технический комитет
- ISO/TC 6/SC 2 - Test methods and quality specifications for paper and board
- SKU
- ISO 2528:2017
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…