ISO 27914:2017 PDF
Carbon dioxide capture, transportation and geological storage — Geological storage
Carbon dioxide capture, transportation and geological storage — Geological storage
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Количество страниц:
- 66
- Дата публикации:
- 13 октября 2017 г.
- Издание:
- ISO IS 27914 edition 1 version 1
- ICS:
- 13.020.40
ISO 27914:2017 a) establishes requirements and recommendations for the geological storage of CO2 streams, the purpose of which is to promote commercial, safe, long-term containment of carbon dioxide in a way that minimizes risk to the environment, natural resources, and human health, b) is applicable for both onshore and offshore geological storage within permeable and porous geological strata including hydrocarbon reservoirs where a CO2 stream is not being injected for the purpose of hydrocarbon production or for storage in association with CO2-EOR, c) includes activities associated with site screening and selection, characterization, design and development, operation of storage sites, and preparation for site closure, d) recognizes that site selection and management are unique for each project and that intrinsic technical risk and uncertainty will be dealt with on a site-specific basis, e) acknowledges that permitting and approval by regulatory authorities will be required throughout the project life cycle, including the closure period, although the permitting process is not included in ISO 27914:2017, f) provides requirements and recommendations for the development of management systems, community and other stakeholder engagement, risk assessment, risk management and risk communication, g) does not apply to, modify, interpret, or supersede any national or international regulations, treaties, protocols or instruments otherwise applicable to the activities addressed in ISO 27914:2017, and h) does not apply to or modify any property rights or interests in the surface or the subsurface (including mineral rights), or any pre-existing commercial contract or arrangement relating to such property. The life cycle of a CO2 geological storage project covers all aspects, periods, and stages of the project, from those that lead to the start of the project (including site screening, selection, characterization, assessment, engineering, permitting, and construction), through the start of injection and proceeding through subsequent operations until cessation of injection and culminating in the post-injection period, which includes a closure period. Figure 1 illustrates the limits of ISO 27914:2017.
Abstract
Overview
ISO 27914:2017 - Carbon dioxide capture, transportation and geological storage - Geological storage - establishes requirements and recommendations to enable safe, long‑term geological storage of CO2. The standard promotes commercial, safe containment of CO2 streams that minimizes risks to the environment, natural resources and human health. It applies to onshore and offshore storage in permeable, porous strata (including hydrocarbon reservoirs) except where CO2 injection is for hydrocarbon production or CO2‑EOR. ISO 27914:2017 covers the full project life cycle from site screening and selection through injection, operation, cessation of injection and the post‑injection (closure) period.
Key topics and technical requirements
ISO 27914:2017 covers both management and technical aspects. Main topic areas include:
- Management systems: project scope, roles and responsibilities, documentation, communication, resources and competence, stakeholder engagement.
- Site screening, selection and characterization: geological and hydrogeological evaluation, confining strata, baseline geochemical and geomechanical data, well characterization.
- Modelling: geostatistical models, flow, geochemical and geomechanical modelling to assess storage behaviour and capacity.
- Risk management: structured risk assessment, evaluation criteria, risk treatment plans, risk communication and consultation.
- Well infrastructure: materials selection, well design, cementing, groundwater protection, corrosion control, construction, completion and wellbore monitoring.
- Project boundaries and lifecycle: organizational, operational and project delineation, and closure planning.
- Stakeholder and community engagement: requirements and recommendations for transparent communication throughout the project life cycle.
The standard provides requirements and recommendations rather than prescriptive technical recipes; it acknowledges that site selection and management are project‑specific and that regulatory permitting is required though permitting processes are not included in the document.
Practical applications
ISO 27914:2017 is used to:
- Develop and document CO2 storage project management systems and technical plans.
- Guide site screening, characterization and modelling to support storage feasibility and design.
- Structure risk assessments, mitigation and communication strategies to protect health, safety and the environment.
- Define well integrity, materials and monitoring needs during construction, operation and closure.
- Support transparency with stakeholders and provide a framework aligned with best practices for long‑term containment.
Who should use it
- CO2 geological storage project operators and engineering teams
- Subsurface and reservoir geoscientists and modelers
- Drilling and well integrity engineers
- Environmental, health & safety and risk managers
- Regulators and permitting authorities (for reference)
- Consultants, auditors and investors evaluating storage projects
Limitations and relations
ISO 27914:2017 does not supersede national/international laws, treaties or property rights, nor does it cover permitting procedures. It should be used alongside applicable regulations and complementary standards for monitoring, measurement and verification.
Технические детали
- Технический комитет
- ISO/TC 265 - Carbon dioxide capture, transportation, and geological storage
- SKU
- ISO 27914:2017
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…