ISO 2975-1:1974 PDF

Name: ISO 2975-1:1974 — Measurement of water flow in closed conduits — Tracer methods — Part 1: General
SKU: ISO 2975-1:1974
Price: 25 EUR
Availability: InStock

Measurement of water flow in closed conduits — Tracer methods — Part 1: General

Название (английский):

ISO 2975-1:1974

Measurement of water flow in closed conduits — Tracer methods — Part 1: General

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 1 мая 1974 г.
Издание:: ISO IS 2975 edition 1 version 1
ICS:: 17.120.10

Тип поставки:

Full version165 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:165 €

Описание (английский):

Tracer methods apply to flow measurement in conduits into which a solution can be injected and those cases where effective mixing of this solution with the water flowing in the conduit can be achieved, this last condition being fundamental. Covers choice of method, choice of tracer, choice of measuring length and adequate mixing distance, and possible errors.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 2975-1:1974, "Measurement of water flow in closed conduits - Tracer methods - Part 1: General," defines the general principles and practical guidance for measuring water flow in pipes and other closed conduits using tracer techniques. The standard applies where a solution can be injected and effective mixing with the conduit flow can be achieved - a fundamental requirement for reliable tracer-based flow measurement. SI units are used throughout.

Key topics and requirements

Scope and applicability

Applies to water flow measurement in closed conduits; other liquids and gases are treated in other standards.
Requires the ability to inject a tracer solution and attain adequate mixing before measurements.

Choice of method

Describes three fundamental procedures: dilution methods (constant-rate injection and integration/sudden injection) and transit-time methods.
Discusses advantages and limitations of dilution versus transit-time approaches for different field conditions.

Choice of tracer

Reviews non‑radioactive tracers (e.g., sodium dichromate, sodium chloride, rhodamines, fluorescein) and radioactive tracers (e.g., bromine-82, sodium-24, tritium), with pros/cons for detection sensitivity, toxicity, regulatory needs, and operational logistics.
Emphasizes tracer properties: mixability, chemical inertness, detectability at low concentration, minimal impact on flow, and cost.

Mixing distance and measuring length

Defines mixing distance as the minimum distance from injection to measurement where cross‑sectional concentration variation is within acceptable limits.
Notes dependence of mixing distance on pipe diameter, Reynolds number, friction factor and allowed concentration variation.
Provides practical measures to reduce mixing distance, such as multi‑orifice injectors, multi‑point sampling, high‑velocity jets, upstream pumps/turbines, and use of bends or obstructions to promote turbulence.

Errors and uncertainty

Identifies systematic and random errors pertinent to tracer methods and states that, under good conditions, errors can be less than 1%.

Applications and users

ISO 2975-1 is intended for professionals who need accurate water flow measurement in closed conduits:

Water utilities and pipeline operators for flow gauging and commissioning

Environmental and hydraulic engineers conducting field studies

Researchers and laboratories validating flowmeter performance

Consultants specifying tracer‑based flow surveys for treatment plants, pumped systems, and closed drainage

Practical uses include selecting an appropriate tracer, determining required measuring lengths and mixing distances, designing injection and sampling layouts, and assessing measurement uncertainty.

Related standards

This document is Part 1 of a series by ISO/TC 30. Subsequent parts cover specific methods and tracer types (e.g., Parts II–VII addressing constant‑rate and integration methods, radioactive and non‑radioactive tracers, and transit‑time techniques). Consult the full ISO 2975 series for detailed procedures and test methods.

ISO 2975-1:1974 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

SIST ISO 2975-1:1997

Measurement of water flow in closed conduits -- Tracer methods -- Part 1: General

SIST ISO 2975-3:1997

Measurement of water flow in closed conduits -- Tracer methods -- Part 3: Constant rate injection method usin…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies