ISO 31657-3:2025 PDF

Name: ISO 31657-3:2025 — Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Characteristic values for calculation of tilting pad journal bearings
SKU: ISO 31657-3:2025
Price: 25 EUR
Availability: InStock

Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Characteristic values for calculation of tilting pad journal bearings

Название (английский):

ISO 31657-3:2025

Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Characteristic values for calculation of tilting pad journal bearings

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 73
Дата публикации:: 16 октября 2025 г.
Издание:: ISO IS 31657 edition 1 version 1
ICS:: 21.100.10

Тип поставки:

Full version1 095 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:13 раб. дн. (перевод)

Цена:1 095 €

Описание (английский):

This document specifies the characteristic values for selected tilting-pad journal bearings with four or five centrally or eccentrically supported tilting pads, and with angular spans of pad sliding surfaces of Ω = 80°, 60° and 45°.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 31657-3:2025 - Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3 specifies characteristic values for the calculation of tilting‑pad journal bearings. It covers selected tilting‑pad designs with four or five pads, either centrally or eccentrically supported, and pad sliding surface angular spans Ω = 80°, 60° and 45°. The data are intended for stationary (steady‑state) operating conditions and support safe hydrodynamic bearing design in accordance with ISO 31657‑1:2025.

Key topics and technical requirements

Scope of data: Dimensionless characteristic values tabulated and plotted for selected tilting‑pad geometries (Tables 1–56 and Annex A curves).

Geometry covered: Four‑ and five‑pad tilting‑pad bearings with central/eccentric pivots and specified pad angular spans (Ω = 80°, 60°, 45°).

Static characteristic values: Includes the Sommerfeld number, relative eccentricity, attitude angle, product of maximum film pressure and Sommerfeld number (pS·o), minimum relative film thickness h*, friction force parameter f*, and lubricant flow‑rate parameters.

Dynamic characteristic values: Non‑dimensional lubricant film stiffness coefficients (c*) and damping coefficients (d*) for use in rotor‑bearing dynamic analysis.

Formulas and symbols: Dimensionless parameters and symbols follow ISO 31657‑1:2025 (e.g., So, ε, β). Example formulae (Sommerfeld number, relative eccentricity, film thickness, stiffness/damping scaling) are referenced in the standard.

Design conditions: Values are calculated for the operating range 0.02 ≤ h ≤ 1 and are valid for stationary operating states under the presumptions and boundary conditions of ISO 31657‑1.

Application guidance: The standard notes that equivalent calculation procedures are acceptable if they provide comparable numerical solutions.

Applications and who should use it

ISO 31657-3:2025 is aimed at professionals involved in the design, analysis and maintenance of hydrodynamic tilting‑pad journal bearings:

Mechanical and rotating‑machinery engineers designing bearings for turbines, compressors, generators and pumps

Bearing manufacturers and OEMs validating pad geometry and performance

Tribologists and researchers performing bearing performance and stability studies

Condition‑monitoring and maintenance engineers assessing operating margins and lubrication needs

Use cases include preliminary sizing, dynamic stiffness/damping input for rotor‑bearing models, friction and heat‑generation estimates, and validation of numerical bearing solutions.

Related standards

ISO 31657‑1:2025 - Calculation of multi‑lobed and tilting‑pad journal bearings (normative reference)

ISO/TS 31657‑3:2020 - Previous technical specification replaced by this first edition

Keywords: ISO 31657-3:2025, tilting‑pad journal bearings, hydrodynamic plain bearings, characteristic values, Sommerfeld number, film thickness, stiffness, damping, bearing calculation.

ISO 31657-3:2025 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who should use it

Related standards

Технические детали

ISO 31657-1:2025

Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 1: Calculation of m…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines