ISO 3908:2009 PDF

Name: ISO 3908:2009 — Hardmetals — Determination of insoluble (free) carbon — Gravimetric method
SKU: ISO 3908:2009
Price: 25 EUR
Availability: InStock

Hardmetals — Determination of insoluble (free) carbon — Gravimetric method

Название (английский):

ISO 3908:2009

Hardmetals — Determination of insoluble (free) carbon — Gravimetric method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 29 сентября 2009 г.
Издание:: ISO IS 3908 edition 3 version 1
ICS:: 77.160

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

ISO 3908:2009 specifies a gravimetric method for the determination of the mass fraction of insoluble (free) carbon in carbides and hardmetals. This method is applicable to carbides of hafnium, molybdenum, niobium, tantalum, titanium, vanadium, tungsten and zirconium, mixtures of these carbides and binder metals, free of lubricant, and all grades of presintered or sintered hardmetals, produced from these carbides, having a mass fraction of insoluble carbon between 0,02 % and 0,5 %.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview - ISO 3908:2009 (Hardmetals, Insoluble / Free Carbon, Gravimetric)

ISO 3908:2009 specifies a gravimetric laboratory method to determine the mass fraction of insoluble (free) carbon in carbides and hardmetals. The procedure applies to carbides of hafnium, molybdenum, niobium, tantalum, titanium, vanadium, tungsten and zirconium, their mixtures with binder metals, and all grades of pre‑sintered or sintered hardmetals. The method covers samples with free carbon in the range 0.02 % to 0.5 % (mass fraction).

Key topics and technical requirements

Principle: chemical decomposition of carbide followed by collection and gravimetric determination of insoluble carbon (combustion to CO2).

Scope limits: applicable to specified carbides and hardmetals, free of lubricant; measurement range 0.02–0.5 %.

Sample preparation: crush to powder passing a 180 µm sieve; perform analysis on two or three test portions (approx. 2.5 g each).

Reagents: analytical‑grade nitric acid and hydrofluoric acid (specified concentrations/preparations).

Apparatus: standard lab glassware plus platinum dish (200 ml), ceramic or refractory filter device (Gooch crucible), vacuum filtration, and an oxygen combustion furnace (~1 200 °C tube temperature).

Procedure highlights: attack with 75 ml HNO3 and ~10 ml HF on a steam bath until dissolution; filter and wash residue thoroughly; dry filter at 110 °C; burn residue in oxygen and measure CO2 mass.

Calculation: mass fraction of carbon (%) = (m1 − m0) × 27.29 / m where m = test portion mass; m1 = CO2 mass from sample combustion; m0 = CO2 mass from blank; 27.29 = CO2→C conversion × 100.

Quality control / tolerances: allowed deviations between replicate determinations:

0.02–0.10 %: ±0.02 % (two determinations) or ±0.03 % (three)
0.10–0.50 %: ±0.04 % (two) or ±0.05 % (three)
Report arithmetic mean rounded to 0.01 %.

Safety note: HF and concentrated HNO3 are highly hazardous - use a fume cupboard and appropriate PPE.

Applications and users

Hardmetal and cemented carbide manufacturers for quality control of free carbon content.

Powder metallurgy and materials testing laboratories performing compositional analysis.

R&D labs optimizing sintering parameters and binder/carbide ratios.

Failure‑analysis and process control teams monitoring carbon‑related defects.

Accurate free carbon measurement supports control of microstructure and performance (e.g., binder phase stability and wear behavior) in hardmetals.

Related standards

ISO 3907:2009 - referenced normative method for determination of total carbon (gravimetric), which complements ISO 3908 when full carbon balance is needed.

Keywords: ISO 3908, hardmetals, free carbon, insoluble carbon, gravimetric method, carbides, cemented carbide, quality control, powder metallurgy, HF safety.

ISO 3908:2009 PDF

Abstract

Похожие стандарты

Overview - ISO 3908:2009 (Hardmetals, Insoluble / Free Carbon, Gravimetric)

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 3907:2009

Hardmetals — Determination of total carbon — Gravimetric method

SIST EN ISO 3908:2009

Hardmetals - Determination of insoluble (free) carbon - Gravimetric method (ISO 3908:2009)

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies