ISO 4070:2025 PDF

Overview

ISO 4070:2025 - Polyvinylidene fluoride (PVDF) - Effect of time and temperature on expected strength specifies minimum expected strength (reference lines) for PVDF homopolymer used in extruded pipes and injection‑moulded fittings. The standard provides a mathematical basis for predicting long‑term performance (hoop strength) as a function of time, temperature and stress, enabling consistent design calculations and material assessment for piping components.

Key topics and requirements

• Reference lines for expected strength: Two analytical branches describe log t as a function of temperature (T, K) and hoop stress (σ, MPa). The lower value from the two branches represents the expected hoop strength.
• Variables and scope: Equations use time (hours), temperature (Kelvin) and hoop stress (MPa). Applicable temperature range: 10 °C to 120 °C.
• Extrapolation limits: Time limits for extrapolation are defined (based on 1 year testing at 110 °C and an Arrhenius approach with conservative activation energy). Table values set minimum extrapolation time limits by temperature.
• Tabulated and graphical data: The standard includes reference graphs and a table of expected hoop strength values for common time/temperature combinations (no design factors applied).
• Conformance testing: Annex A specifies demonstrating conformity via ISO 9080 or equivalent internal pressure testing (ISO 1167 series) and statistical plotting (≥97.5 % of results on or above the reference line).
• Wall thickness and S values: Annex B gives principles to derive maximum calculated S values and minimum wall thicknesses for service classes, linking expected strength to application classes and design pressures.

Applications and users

• Who uses ISO 4070:2025
  • Pipe and fitting manufacturers (PVDF homopolymer)
  • Design and mechanical engineers specifying plastic piping systems
  • Test laboratories performing long‑term hydrostatic strength evaluation
  • Regulatory bodies and specifiers for building and fluid transport systems
• Typical applications
  • Design and verification of PVDF piping systems for hot/cold water and heating systems
  • Calculation of hoop stress, minimum wall thickness and service life projections
  • Material qualification and supplier comparison based on unified reference lines

Related standards

• ISO 9080:2012 - long‑term hydrostatic strength extrapolation methods
• ISO 1167‑1 / ISO 1167‑2 - internal pressure test methods for thermoplastic pipes/fittings
• ISO 10508, ISO 12162 - application class and service coefficients references
• Relevant ISO piping series (ISO 15874, ISO 15875, etc.) for comparison across materials

ISO 4070:2025 centralises PVDF expected strength data into reproducible reference lines, facilitating reliable design decisions, conformity assessment and product standardisation for PVDF piping components.