ISO 4250-3:2020 PDF

Name: ISO 4250-3:2020 — Earth-mover tyres and rims — Part 3: Rims
SKU: ISO 4250-3:2020
Price: 25 EUR
Availability: InStock

Earth-mover tyres and rims — Part 3: Rims

Название (английский):

ISO 4250-3:2020

Earth-mover tyres and rims — Part 3: Rims

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 15
Дата публикации:: 15 сентября 2020 г.
Издание:: ISO IS 4250 edition 5 version 1
ICS:: 53.100

Тип поставки:

Full version225 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:225 €

Описание (английский):

This document sets out the designation, contours and dimensions for rims for narrow- and wide-base off-road tyres primarily intended for earth-moving machinery. All dimensions in this document are given in millimetres and are applicable to the side of the rim which is in contact with the tyre. Tyre designations and dimensions, tyre classifications and nomenclature are given in ISO 4250-1, ISO 10571 and ISO 13442. Annex A gives details on sealing ring grooves and O-rings for earth-mover rims.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 4250-3:2020 (Earth‑mover rims)

ISO 4250-3:2020 is the international standard that defines designation, contours and dimensions for rims used with narrow- and wide‑base off‑road tyres primarily for earth‑moving machinery. Published as the fifth edition in 2020, the document gives rim identification and marking rules, standardized rim contours and dimensional tolerances (all dimensions in millimetres), and includes an informative Annex A on sealing ring grooves and O‑rings. It forms Part 3 of the ISO 4250 series covering earth‑mover tyres and rims.

Key topics and technical requirements

Rim identification and marking: Codes for specified rim diameter and nominal width between flanges; markings must be visible on the weather side or on the disk where applicable.

Rim contours and dimensions: Standardized contours (multiple rim types such as tapered, semi‑drop‑centre and drop‑centre) and tables of dimensions and tolerances to ensure correct tyre mounting and fit.

Dimensional units and tolerances: All sizes given in millimetres; tolerances for specified rim diameters and dimensional notes for tyre‑mounting sides.

Rim knurling: Optional knurling details for rims where required.

Rim loads and inflation pressures: Guidance that rim and wheel loads/pressures must not exceed rim/wheel manufacturer recommendations even if tyre approvals allow higher values - consult manufacturers for capacities.

Sealing ring grooves and O‑rings: Annex A provides details for sealing features specific to earth‑mover rims.

Compatibility notes: References tyre designations and dimensions specified in ISO 4250‑1, ISO 10571 and ISO 13442 for approved tyre/rim combinations.

Applications and who uses it

ISO 4250‑3 is intended for use by:

Rim and wheel manufacturers - to design and mark rims to a common specification for earth‑moving equipment.

Tyre manufacturers and OEMs - to ensure correct tyre/rim pairing and safe mounting.

Fleet owners, maintenance engineers and service technicians - to verify correct rims, markings and service limits for off‑road machinery.

Testing laboratories and conformity assessors - for dimensional checks and compliance.

Procurement and specification writers - to specify rim requirements in tenders and technical documentation.

Practical benefits: improved safety, interchangeability, reduced mounting errors, and clearer procurement/specification language for off‑road tyre and rim systems.

Related standards

ISO 4250‑1 (tyre designations and dimensions)

ISO 10571, ISO 13442 (tyre classifications and nomenclature)

ISO 3911 (wheels and rims vocabulary, designation and marking)

Keywords: ISO 4250-3, earth‑mover rims, rim dimensions, rim contours, sealing ring grooves, off‑road tyres, rim marking, rim knurling, inflation pressures.

ISO 4250-3:2020 PDF

Abstract

Похожие стандарты

Overview - ISO 4250-3:2020 (Earth‑mover rims)

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

ISO 4250-2:2014

Earth-mover tyres and rims — Part 2: Loads and inflation pressures

ISO 4250-1:2014

Earth-mover tyres and rims — Part 1: Tyre designation and dimensions

ISO 10571:2011

Tyres for mobile cranes and similar specialized machines

ISO 13442:2004

Tyres and rims for construction machines

ISO 4250-3:2006

Earth-mover tyres and rims — Part 3: Rims

BS ISO 3911:2021

Wheels and rims for pneumatic tyres. Vocabulary, designation and marking.