ISO 4301-2:2020 PDF

Name: ISO 4301-2:2020 — Cranes — Classification — Part 2: Mobile cranes
SKU: ISO 4301-2:2020
Price: 25 EUR
Availability: InStock

Cranes — Classification — Part 2: Mobile cranes

Название (английский):

ISO 4301-2:2020

Cranes — Classification — Part 2: Mobile cranes

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 1 декабря 2020 г.
Издание:: ISO IS 4301 edition 3 version 1
ICS:: 53.020.20

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This document establishes a general classification of mobile cranes and related crane mechanisms based on the service conditions, mainly expressed by the following: — the total number of working cycles to be carried out during the specified design life of the crane; — the load spectrum factor which represents the relative frequencies of loads to be handled; — the average load displacements. This document is applicable for the work spectrum between moderate to very heavy number of work cycles as described in Table 2.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 4301-2:2020 (Cranes - Classification - Part 2: Mobile cranes)

ISO 4301-2:2020 establishes a cycle-based classification system for mobile cranes and their mechanisms according to intended service conditions. The standard defines how to express duty in terms of the total number of working cycles over the crane’s design life, the load spectrum factor, and average load displacements. It applies to work spectra from moderate to very heavy numbers of work cycles and provides tabulated group classifications and minimum design-use durations for common crane mechanisms.

Key topics and technical requirements

Classes of utilization (U): Nine utilization classes (Table 1) that group total design working cycles for a crane or component.

Load spectrum factor (Kp): Parameter describing the frequency distribution of handled loads relative to rated capacity; used to determine the state of loading.

Group classification: Combination of utilization class and state of loading to produce a single group classification for the whole crane (see Table 2) or for individual components.

Component classification: Specific guidance for hoisting, slewing, luffing, telescoping and travelling drives; components may have different classifications from the crane as a whole.

Average displacements: Selection and classification based on average process conditions (refer to ISO 4301-1:2016 guidance).

Minimum duration of use under full load: Table 4 lists minimum hours for hoist, slew, luff, telescoping and travel functions for different service conditions (light use to heavy-duty intensive use).

Cycle-based conversion guidance: Annex A provides formulae and worked examples to convert time-based duty into cycle-based design numbers (useful for lifecycle and fatigue design).

Practical applications and users

Manufacturers and design engineers: to size and design structural and mechanical elements (hoists, slewing units, telescopes) to match expected duty and service life.

Purchasers and specifiers: to define crane duty in procurement contracts and match equipment to jobsite requirements.

Maintenance planners and asset managers: to plan inspection intervals, maintenance schedules and component replacement based on expected cycle counts.

Certification bodies, safety managers and regulators: to assess conformity, safety margins and appropriate group classification for operational risk management.

Rental companies and fleet operators: to select appropriate cranes for tasks (container handling, general construction, wind-turbine erection) and predict lifecycle costs.

Related standards

ISO 4301-1:2016 - Cranes - Classification - Part 1: General (basis for cycle classification)

ISO 4306-1 and ISO 4306-2 - Cranes - Vocabulary (general and mobile cranes terminology)

Other parts in the ISO 4301 series for additional crane types and classifications

ISO 4301-2:2020 is essential when specifying crane duty, translating operational profiles into reliable, standardized group classifications, and ensuring design and maintenance policies reflect real-world mobile crane usage.

ISO 4301-2:2020 PDF

Abstract

Похожие стандарты

Overview - ISO 4301-2:2020 (Cranes - Classification - Part 2: Mobile cranes)

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

ISO 4301-1:2016

Cranes — Classification — Part 1: General

SIST ISO 4306-1:2012

Cranes - Vocabulary - Part 1: General

SIST ISO 4306-2:2013

Cranes - Vocabulary - Part 2: Mobile cranes

BS ISO 4301-4:2025

Cranes — Classification - Jib cranes