ISO 4593:1993 PDF

Overview

ISO 4593:1993 is an international standard published by the International Organization for Standardization (ISO) that specifies a mechanical scanning method for determining the thickness of plastics film and sheeting. This method enables precise thickness measurement critical to quality control and product specification in the plastics industry. However, it is important to note that this method is not suitable for embossed films or sheeting. Developed by ISO/TC 61 (Plastics), Subcommittee SC 11 (Products), this standard replaces the 1979 edition with updated technical revisions to improve accuracy and applicability.

Key Topics

• Scope and Application ISO 4593:1993 applies specifically to plastics films and sheets, providing guidelines for mechanical scanning thickness measurement. It excludes embossed films or sheets due to the surface irregularities that affect measurement accuracy.

• Measurement Equipment The standard defines requirements for the measuring device, including:

  • Use of a device providing mechanical thickness measurements with precision depending on the thickness range.
  • Precision tolerances: 1 µm for thickness up to 100 µm, 2 µm for thickness between 100 µm and 250 µm, and 3 µm for thickness above 250 µm.
  • Measuring device surfaces must be polished, with flat or rounded measuring faces under defined geometric parameters.
  • Applied force during measurement is specified to avoid deforming the material (0.1 N to 1.0 N depending on the probe face).

• Sample Preparation Samples, or test specimens, are cut approximately 100 mm wide from the plastic film or sheet without folds or defects. Conditioning of specimens at controlled temperature (23 °C ± 2 °C) and humidity is recommended prior to measurement, especially for moisture-sensitive films.

• Procedure Measurement points are taken at defined intervals along the sample length:

  • 10 points for widths less than 300 mm,
  • 20 points for widths between 300 mm and 1500 mm,
  • At least 30 points for widths greater than 1500 mm. Measurements near edges are avoided (minimum 50 mm from edges for non-slit rolls). The device zero calibration is checked regularly to ensure consistent results.

• Reporting Test reports must include:

  • Reference to ISO 4593 standard,
  • Identification details of the sample,
  • Description of measuring equipment and applied force,
  • Sample length and number of measurements,
  • Arithmetic mean thickness expressed to 0.001 mm precision,
  • Optional individual measurement values and statistical data such as standard deviation.

Applications

ISO 4593:1993 provides a reliable method for assessing thickness of plastic films and sheets used in:

• Packaging materials manufacturing – ensuring uniformity and compliance with product specifications.
• Quality control laboratories – to verify production consistency and tolerance adherence.
• Research and development – to analyze new materials where precise thickness measurement is essential.
• Regulatory compliance – where thickness specifications are mandated for safety or performance reasons.

This mechanical scanning method aids manufacturers and users in making informed decisions about material suitability, processing parameters, and end-use characteristics.

Related Standards

Professionals working with ISO 4593:1993 may also refer to other relevant ISO standards for comprehensive plastics testing:

• ISO 4591:1992 – Plastics Film and Sheeting - Determination of Thickness by Gravimetric Method (alternative thickness measurement).
• ISO 527 – Plastics - Determination of Tensile Properties (mechanical performance testing).
• ISO 9001 – Quality Management Systems (general quality requirements pertinent to production and testing).

Understanding and applying ISO 4593 in conjunction with these documents helps ensure full compliance with industry best practices for plastics film and sheeting evaluation.

Keywords: ISO 4593, plastics film thickness, plastic sheeting measurement, mechanical scanning, thickness determination, plastic film testing, quality control plastics, plastic sheet thickness standard.