ISO 4940:1985 PDF

Name: ISO 4940:1985 — Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method
SKU: ISO 4940:1985
Price: 25 EUR
Availability: InStock

Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method

Название (английский):

ISO 4940:1985

Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 7
Дата публикации:: 19 декабря 1985 г.
Издание:: ISO IS 4940 edition 1 version 1
ICS:: 77.080.01

Тип поставки:

Full version105 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:105 €

Описание (английский):

The method is applicable to nickel contents between 0.002 % (m/m) and 0.5 % (m/m). Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report. Annex A gives additional information on the international co-operative tests, and Annex B represents the precision data graphically.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 4940:1985 specifies a validated flame atomic absorption spectrometric (AAS) method for the determination of nickel (Ni) in steel and cast iron. The standard covers sample dissolution, reagent recipes, apparatus and instrument settings, calibration, calculation and reporting. The method is applicable to nickel contents in the range 0.002 % to 0.5 % (m/m) and includes precision data from inter‑laboratory trials.

Keywords: ISO 4940, nickel determination, flame atomic absorption spectrometry, AAS, steel and cast iron, nickel content.

Key topics and technical requirements

Scope and principle: Dissolve a test portion in acids, evaporate to fuming with perchloric acid, spray the solution into an air‑acetylene flame and measure Ni atomic absorption (primary line 352.5 nm; alternative 232.0 nm if sensitivity is insufficient).

Reagents: Includes recipes such as hydrochloric acid–nitric acid–water mixture (3:1:2 by volume) and nitric–perchloric acid mixture (100 ml HNO3 + 800 ml HClO4 diluted to 1 L). Use reagents and water of very low Ni content.

Standards and calibration: Stock Ni solution (1 g Ni/L) and working standard (40 mg Ni/L). Prepare a fresh calibration graph for each series; determine the “zero‑member” concentration by extrapolation before plotting.

Instrument performance: Specifies detector/wavelength, flame (air‑acetylene, slightly lean), lamp current per manufacturer, bandwidth guidance (352.5 nm: 0.2–0.4 nm; 232.0 nm: 0.15–0.25 nm) and precision criteria for absorbance measurements.

Detection and characteristic concentrations: Characteristic concentration targets and limits of detection are given for both wavelengths (e.g., limit of detection better than 0.30 µg Ni/mL at 352.5 nm and 0.15 µg Ni/mL at 232.0 nm).

Safety and cleanliness: Warnings on perchloric acid vapours, acetylene hazards, UV protection and the need to remove perchloric residues from glassware and burner heads.

Practical applications

Routine chemical analysis laboratories testing steel and cast iron for nickel content (quality control, material certification).

Metallurgical labs verifying alloy composition for corrosion resistance, mechanical properties and conformity to specifications.

Regulatory or procurement testing where quantified Ni content in ferrous materials is required.

Related standards

ISO/R 377 - selection and preparation of samples for wrought steel (sampling guidance referenced).

ISO 5725 - precision of test methods (used for inter‑laboratory precision evaluation cited in the standard).

This concise summary helps users quickly understand ISO 4940’s scope, method essentials and practical use cases for nickel determination in steel and cast iron using flame AAS.

ISO 4940:1985 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications

Who should use this standard

Related standards

Технические детали

ISO 4940:2025

Steel and cast iron — Determination of nickel content — Flame atomic absorption spectrometric method

ISO 5725-6:1994/Cor 1:2001

Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy va…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies