ISO 5109:2023 PDF

Name: ISO 5109:2023 — Evaluation method for the resonance frequency of the multi-copter UA (unmanned aircraft) by measurement of rotor and body frequencies
SKU: ISO 5109:2023
Price: 25 EUR
Availability: InStock

Evaluation method for the resonance frequency of the multi-copter UA (unmanned aircraft) by measurement of rotor and body frequencies

Название (английский):

ISO 5109:2023

Evaluation method for the resonance frequency of the multi-copter UA (unmanned aircraft) by measurement of rotor and body frequencies

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 9
Дата публикации:: 13 июля 2023 г.
Издание:: ISO IS 5109 edition 1 version 1
ICS:: 49.020

Тип поставки:

Full version135 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:135 €

Описание (английский):

This document provides a method for evaluating the resonance vibration frequency of the multi-copter unmanned aircraft (UA). This document specifies a method of designing the UA so as to avoid the resonance generated by the coincidence of the natural frequency of the UA body and the rotational frequency of the rotor. This document is applicable to multi-copter UA weighing less than 150 kg.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview - ISO 5109:2023 (Evaluation method for resonance frequency of multi‑copter UA)

ISO 5109:2023 defines a practical, test‑based method to evaluate and avoid resonance in multi‑copter unmanned aircraft (UA) by measuring rotor and body vibration frequencies. Applicable to multi‑copter UAs weighing less than 150 kg, the standard correlates rotor excitation (rotational frequencies and thrust) with the UA’s natural (modal) frequencies and gives guidance on test setups, measurement techniques and evaluation criteria to prevent resonance‑induced damage.

Key topics and technical requirements

Scope and applicability: Multi‑copter UA under 150 kg; focuses on resonance caused by coincidence of rotor rotational frequency and body natural frequency.

Test methods: Two primary approaches depending on UA size:

Impact/hammering method for small UAs (suspended on wire or supported on soft sponge) using an impact hammer, accelerometers and FFT analysis to capture natural frequencies and mode shapes.
Excitation table/vibrator method for larger UAs, following IEC vibration test practices (IEC 60068‑2‑6, IEC 60068‑2‑64) to sweep and measure frequency response.

Rotor and thrust measurement: Measure rotor speed and thrust force using tachometers or microphones (microphone preferred for very high‑speed small motors) and load cells to determine the operating frequency range and arming frequency.

Modal analysis: Use accelerometers, multi‑point measurements and frequency response functions (FRFs) to determine natural frequencies, damping and mode shapes. FFT and signal analysis tools are used for processing.

Design factors: The standard highlights the principal design drivers for natural frequency - Young’s modulus, second moment of inertia, mass distribution, and arm length - and provides a cantilever‑arm formula to assess their influence.

Resonance evaluation: Compare the UA natural frequencies with the operating (rotor) frequency range; if overlap exists, take corrective measures such as changing structural design or altering motor/rotor specifications. Margin determination is left to designer experience or project requirements.

Practical applications and who uses this standard

UA designers and structural engineers: to validate designs and avoid resonance during design iterations.

Test engineers and labs: to perform vibration and rotor tests, modal analysis and certification testing.

Manufacturers and integrators: to choose motors/propellers and structural materials that avoid operational resonance.

Regulatory and safety assessors: to assess structural robustness and conformity with vibration safety best practices.

Researchers: studying aero‑elastic and vibration interactions in multi‑copters.

Related standards

IEC 60068‑2‑6 (vibration - sinusoidal)

IEC 60068‑2‑64 (vibration - broadband random)

ASTM E1876 (support system guidance referenced for small‑article testing)

Keywords: ISO 5109:2023, multi‑copter, unmanned aircraft, resonance frequency, natural frequency, rotor speed, vibration testing, modal analysis, thrust measurement.

ISO 5109:2023 PDF

Abstract

Похожие стандарты

Overview - ISO 5109:2023 (Evaluation method for resonance frequency of multi‑copter UA)

Key topics and technical requirements

Practical applications and who uses this standard

Related standards

Технические детали

IEC 60068-2-69:2017/COR1:2018

Corrigendum 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic co…

IEC 60068-2-64:2008

Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies