ISO 5110:2023 PDF
Test method for flight stability of a multi-copter unmanned aircraft system (UAS) under wind and rain conditions
Test method for flight stability of a multi-copter unmanned aircraft system (UAS) under wind and rain conditions
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 20
- Дата публикации:
- 21 августа 2023 г.
- Издание:
- ISO IS 5110 edition 1 version 1
- ICS:
- 49.020
This document specifies the procedures for testing flight stability of a multi-copter unmanned aircraft system (UAS) and is applicable to multi-copter type UAS that can take-off and land vertically. A commercial multi-copter UAS weighing over 250 g to less than 150 kg is discussed in this document. Further, this document is applicable to military and civilian multi-copter UAS. However, quantitatively specific stability criteria for the test are not specified in this document.
Abstract
Overview
ISO 5110:2023 - Test method for flight stability of a multi-copter unmanned aircraft system (UAS) under wind and rain conditions - defines procedures to evaluate the flight stability of multi‑copter UAS (vertical take-off and landing) in realistic environmental conditions. The standard applies to commercial, military and civil multi‑copter UAS weighing over 250 g to less than 150 kg. It specifies test purpose, apparatus, test conditions and six principal test cases (with and without rainfall) but does not prescribe quantitative pass/fail stability criteria.
Key topics and technical requirements
- Test scope and applicability
- Multi‑copter UAS (VTOL) from >250 g to
Технические детали
- Технический комитет
- ISO/TC 20/SC 16 - Unmanned aircraft systems
- SKU
- ISO 5110:2023
Похожие стандарты
Другие стандарты ISO
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…
ISO/ASTM52901-17(2023)
ДействующийStandard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts
Scope 1.1 This document defines and specifies requirements for purchased parts made by additive manufacturing. 1.2 It gives guidelines for the elements to be exchanged between the customer and the pa…