ISO 5289:2018 PDF

Name: ISO 5289:2018 — Agricultural machinery — Endless hexagonal belts and groove sections of corresponding pulleys
SKU: ISO 5289:2018
Price: 25 EUR
Availability: InStock

Agricultural machinery — Endless hexagonal belts and groove sections of corresponding pulleys

Название (английский):

ISO 5289:2018

Agricultural machinery — Endless hexagonal belts and groove sections of corresponding pulleys

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 23 ноября 2018 г.
Издание:: ISO IS 5289 edition 3 version 1
ICS:: 65.060.01

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This document specifies the main dimensions of endless hexagonal belts intended for use on agricultural machinery (and, in particular, harvester-thresher machines), together with the groove section of the corresponding fixed-diameter pulleys.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 5289:2018 - "Agricultural machinery - Endless hexagonal belts and groove sections of corresponding pulleys" specifies the main dimensions, tolerances and measurement methods for endless hexagonal belts used in agricultural machinery (notably harvester‑threshers) and the groove profiles of the matching fixed‑diameter pulleys. The standard standardizes belt cross‑sections, nominal effective lengths, measuring equipment and test procedures to ensure interchangeability, reliable power transmission and consistent performance in agricultural drive systems.

Key Topics

Belt cross‑sections and profiles: Defines four standard hexagonal profiles (HAA, HBB, HCC, HDD) with nominal width and height values (examples: HAA w = 13 mm, T = 10 mm; HCC w = 22 mm, T = 17 mm).

Standard lengths and tolerances: Covers effective length series (R40 preferred numbers) from about 1 320 mm to 10 000 mm, with length tolerances that vary by size and profile (typical tolerances in the standard range from ±13 mm up to ±50 mm).

Grooved pulley compatibility: Specifies compatible pulley groove systems - the datum system (ISO 4183) and the effective system (ISO 5291) - and maps hexagonal belt profiles to groove types (e.g., HAA → A/AJ, HBB → B/BJ).

Measurement methods: Describes the measuring device (two grooved measuring pulleys, one movable), required measuring forces and pulley dimensions, and a defined procedure and formula for calculating the belt’s effective length from measured centre distances and the measuring‑pulley circumference.

Speed ratio and diameter corrections: Provides guidance on calculating speed ratio and explains correction factors needed to obtain pitch diameters when using ISO 4183 (datum) or ISO 5291 (effective) pulley systems.

Applications

ISO 5289:2018 is intended for:

Agricultural machinery designers and OEMs specifying drive components for harvesters and threshers.

Belt and pulley manufacturers producing belts, grooved pulleys and measuring/test fixtures to standardized dimensions.

Maintenance engineers and fleet managers selecting replacement belts that meet dimensional and tolerance requirements.

Test laboratories performing length and performance verification using the standard measurement procedure.

Using belts and pulleys that conform to ISO 5289 reduces downtime, improves interchangeability across suppliers, and ensures predictable power transmission characteristics in agricultural drives.

Related Standards

ISO 4183 - Classical and narrow V‑belts, pulley groove system (datum)

ISO 5291 - Grooved pulleys for joined classical V‑belts (effective)

ISO 1081 - Belt drives - Vocabulary and definitions

ISO 24035, ISO 3 - referenced for length series and tolerance basis

Keywords: ISO 5289:2018, endless hexagonal belts, agricultural machinery, grooved pulleys, belt dimensions, belt measurement, belt profiles, harvester‑thresher.

ISO 5289:2018 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

SIST ISO 4183:1997

Belt drives -- Classical and narrow V-belts -- Grooved pulleys (system based on datum width)

SIST ISO 5291:2013

Belt drives - Grooved pulleys for joined classical V-belts - Groove sections AJ, BJ, CJ and DJ (effective sys…

SIST ISO 5289:1997

Agricultural machinery -- Endless hexagonal belts and groove sections of corresponding pulleys

ISO 10819:2013/Amd 2:2021

Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissib…

BS ISO 24035:2014

Belt drives. V-belts and the corresponding pulleys for agricultural machineries. Dimensions.

BS EN ISO 3821:2019

Gas welding equipment. Rubber hoses for welding, cutting and allied processes.