Overview
ISO 540:2025 - Hard coal - Determination of ash fusibility defines a standardized laboratory method to determine the characteristic fusion temperatures of ash derived from hard coal. The fifth edition (2025) updates the method (title change, coke removed from scope) and preserves the Seger-cone–style approach used to characterize ash fusibility under controlled high temperature tests. The standard provides repeatable procedures for preparing ash test pieces, heating under defined atmospheres, observing shape changes and reporting characteristic temperatures.
Key topics and technical requirements
- Scope and purpose: determination of deformation, sphere, hemisphere and flow temperatures (DT, ST, HT, FT) that describe ash melting behaviour.
- Principle: controlled heating of an ash test piece and observation of morphological changes at specified temperature intervals.
- Test atmospheres: reducing (CO/CO2 or H2/CO2 mixtures with specified volume fractions) or oxidizing (air or CO2). Safety warnings on CO and H2 ventilation/purging are included.
- Temperature range and equipment:
- Furnace capable of reaching up to ~1 500 °C with a uniform heating zone and controlled heating rate from 815 °C upward.
- Pyrometer/thermocouple (platinum/platinum‑rhodium) located in the temperature zone.
- Optical instrument (graticule/CCTV/video recommended) for continuous profile observation.
- Test piece preparation: ash mixed and formed into specified shapes - pyramid (height 12–19 mm), cube, upright cylinder or truncated cone - with sharp edges for clear observation.
- Reagents and supports: dextrin binder, non‑reactive supports (sintered alumina, mullite, or platinum interfaces) and reference wires/plates (gold, nickel, palladium) for calibration checks.
- Quality and reporting: clauses on calibration, precision (repeatability/reproducibility limits), and required test report content.
Practical applications and users
ISO 540:2025 is used where understanding ash melting behaviour is critical:
- Coal analysis laboratories conducting ash determination and characteristic fusion tests.
- Power plant fuel testing and boiler/furnace operators assessing slagging and clinker formation risk.
- Combustion engineers, fuel suppliers and consultants evaluating fuel selection and combustion performance.
- Researchers and materials scientists studying high‑temperature ash chemistry and deposit formation.
The standard helps predict tendencies for ash fusion and slagging under controlled conditions - a valuable indicator for furnace design, operational troubleshooting and fuel quality control.
Related standards
- ISO 1171 - Coal and coke - Determination of ash (referenced normative standard).
- Developed by ISO/TC 27 (Coal and coke), Subcommittee SC 5 - Methods of analysis.
Keywords: fossil fuels, ash, ashes, tests, high temperature tests, determination, fusibility, coal ash, slagging, ash fusibility.