ISO 5692-2:2002 PDF

Name: ISO 5692-2:2002 — Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket
SKU: ISO 5692-2:2002
Price: 25 EUR
Availability: InStock

Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket

Название (английский):

ISO 5692-2:2002

Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 11 апреля 2002 г.
Издание:: ISO IS 5692 edition 1 version 1
ICS:: 65.060.10

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

This part of ISO 5692 specifies the requirements for vehicle coupling rings with a ring inside diameter of for coupling with the drawbar coupling specified in ISO 6489-2, and for ensuring vehicle coupling with the necessary horizontal and vertical rotation angle. This part of ISO 5692 is applicable to couplings where the vertical static load is not more than and the dynamic horizontal load is not more than the value of . NOTE For value , see ISO 6489-2.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 5692-2:2002 defines requirements for the coupling ring 40 with socket used on agricultural towed vehicles. The standard specifies the 40 mm ring inside diameter for coupling with the drawbar coupling described in ISO 6489-2 and sets limits for vertical static and dynamic horizontal loads to ensure safe towing performance and the necessary horizontal and vertical rotation angles.

Key Topics

Dimensions and shapes: The coupling ring is produced in two shapes (A - welding end, B - flange end). Detailed dimensional requirements and tolerances are to be selected in accordance with ISO 2768-1 and ISO 286-1 where not explicitly specified.

Ring and socket materials: Sockets are specified as CT ISO 683-1 42CrMo4 steel. The ring material for weldable versions is chosen by the manufacturer, with welding procedures provided.

Load limits: Applicable to couplings with vertical static load not exceeding 2 000 kg and a dynamic horizontal load not exceeding a D value of 120 kN (see ISO 6489-2 for D definition).

Welding and hardness control: Welding procedures must limit hardness increase at weld contact surfaces to no more than 300 HV30; preheating to approximately 250 °C is indicated as an example measure.

Socket integrity: Sockets shall not be welded or slotted and must be fastened so they cannot move during travel.

Testing and marking: Ring shapes A and B must be inspected for cracks using a test procedure chosen by the manufacturer. The ring must bear the ISO 5692-2 identification and the manufacturer's mark in a durable, legible form.

Designation examples: e.g., Coupling ring [ISO 5692-2](/search?q=ISO%205692-2)-A-40 and Socket [ISO 5692-2](/search?q=ISO%205692-2)-40.

Applications

ISO 5692-2:2002 is intended for manufacturers, specifiers and maintenance teams working with agricultural tractors and towed implements. Practical benefits include:

Interoperability: Ensures compatibility with drawbar couplings per ISO 6489-2 for predictable fit and rotation.

Safety and reliability: Defined load limits and material specifications reduce risk of coupling failure under typical agricultural operating conditions.

Traceability and compliance: Durable marking and standardized designation help fleet owners and service personnel identify approved components quickly.

Design guidance: Provides manufacturers with welding and hardness control guidance to avoid brittle zones and ensure joint integrity.

Related Standards

ISO 6489-2 - Drawbar coupling 40 dimensions and D value definition

ISO 683-1 - Heat-treatable and alloy steels (reference for 42CrMo4)

ISO 2768-1 - General tolerances for linear and angular dimensions

ISO 286-1 - Limits and fits

Note: ISO 5692 covers mechanical connections on towed vehicles; hitch-rings are identified as the subject of a future Part 1 to ISO 5692. For specific design or testing procedures beyond this summary, consult the full ISO 5692-2:2002 text and the referenced standards.

ISO 5692-2:2002 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 6489-2:1980

Agricultural vehicles — Mechanical connections on towing vehicles — Part 2: Clevis type — Dimensions

SIST ISO 2768-1:1999

General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indic…

SIST EN ISO 286-1:2010/AC:2014

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of…

SIST EN ISO 683-17:2023

Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-…

BS ISO 5692-2:2002

Agricultural vehicles. Mechanical connections on towed vehicles - Coupling ring 40 with socket

ISO 5692:1979

Agricultural vehicles — Mechanical connections on towed vehicles — Hitch-rings — Specifications