ISO 5832-3:2021 PDF

Name: ISO 5832-3:2021 — Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
SKU: ISO 5832-3:2021
Price: 25 EUR
Availability: InStock

Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy

Название (английский):

ISO 5832-3:2021

Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 18 ноября 2021 г.
Издание:: ISO IS 5832 edition 5 version 1
ICS:: 11.040.40

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This document specifies the characteristics of, and corresponding test methods for, the wrought titanium alloy known as titanium 6-aluminium 4-vanadium alloy (Ti-6Al-4V alloy) for use in the manufacture of surgical implants. NOTE The mechanical properties of a sample obtained from a finished product made of this alloy might not necessarily comply with the specifications given in this document.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 5832-3:2021 - "Implants for surgery - Metallic materials - Part 3: Wrought titanium 6‑aluminium 4‑vanadium alloy (Ti‑6Al‑4V)" - specifies the chemical, microstructural and mechanical characteristics, and the corresponding test methods, for wrought Ti‑6Al‑4V used in the manufacture of surgical implants. The standard applies to raw implant material; mechanical properties of finished devices may differ from the raw‑material values.

Keywords: ISO 5832-3:2021, Ti-6Al-4V, wrought titanium, surgical implants, implant materials, biomaterials.

Key topics and requirements

Chemical composition

Aluminium: 5.5–6.75%
Vanadium: 3.5–4.5%
Iron: ≤ 0.30%
Oxygen: ≤ 0.20%
Carbon: ≤ 0.08%
Nitrogen: ≤ 0.05%
Hydrogen: ≤ 0.015% (≤ 0.010% for billets)
Titanium: balance

Microstructure

Acceptable microstructure: equiaxed alpha or elongated primary alpha in a transformed beta matrix with no continuous alpha network at prior beta grain boundaries.
Transverse microstructures for round bars (annealed condition) are referenced to photomicrographs in ISO 20160 (A1–A9).

Mechanical properties (annealed condition)

Tensile strength (Rm): ≥ 860 MPa
Proof/yield strength (Rp0.2): ≥ 780 MPa
Elongation after fracture: ≥ 8% for sheet/strip, ≥ 10% for bars
Bend test: sheet/strip must withstand bending (105°) around a mandrel specified as 10 × t (t = thickness)

Test methods

Tensile tests: ISO 6892-1
Bend tests: ISO 7438
Microstructure classification: ISO 20160

Conformity & retest rules

Retest procedures and pass/fail criteria are defined (including provisions if failures occur inside/outside gauge length).

Applications and users

Practical use: provides material requirements for manufacturers of surgical implants (e.g., orthopaedic and dental implant components), raw material suppliers, medical device OEMs, quality assurance and testing laboratories, and regulators verifying material conformity.

Why it matters: ensures consistent biocompatible, high‑strength, corrosion‑resistant wrought Ti‑6Al‑4V raw material suitable for surgical implant fabrication and global trade.

Related standards

ISO 6892-1 - Tensile testing of metallic materials

ISO 7438 - Bend test for metallic materials

ISO 20160 - Microstructure catalog for alpha+beta Ti alloys

ASTM F136 / F1472 - Harmonization tables and reference specifications for Ti‑6Al‑4V (ELI and non‑ELI grades) - summarized in Annex B of ISO 5832-3:2021

For manufacturers and material engineers, ISO 5832-3:2021 is a key reference when specifying wrought Ti‑6Al‑4V raw stock and when aligning material test reports with global implant‑material requirements.

ISO 5832-3:2021 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

ISO 20160:2006

Implants for surgery — Metallic materials — Classification of microstructures for alpha+beta titanium alloy b…

SIST EN ISO 6892-1:2020

Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)

SIST EN ISO 7438:2021

Metallic materials - Bend test (ISO 7438:2020)