ISO 5838-2:1991 PDF

Name: ISO 5838-2:1991 — Implants for surgery — Skeletal pins and wires — Part 2: Steinmann skeletal pins — Dimensions
SKU: ISO 5838-2:1991
Price: 25 EUR
Availability: InStock

Implants for surgery — Skeletal pins and wires — Part 2: Steinmann skeletal pins — Dimensions

Название (английский):

ISO 5838-2:1991

Implants for surgery — Skeletal pins and wires — Part 2: Steinmann skeletal pins — Dimensions

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 2
Дата публикации:: 17 января 1991 г.
Издание:: ISO IS 5838 edition 1 version 1
ICS:: 11.040.40

Тип поставки:

Full version30 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:30 €

Описание (английский):

Specifies the dimensions. Material and mechanical requirements are covered by ISO 5838-1. Dimensions shall be according to figure 1 to figure 5 and table 1 to table 3. The ends, form A - plain, form B - square and form C - triangular, shall comply with the figures 3 to 5 and tables 2 and 3.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 5838-2:1991 specifies the dimensional requirements for Steinmann skeletal pins used as surgical implants. Part of the ISO 5838 series on skeletal pins and wires, this document defines the geometric features, allowable forms of pin ends and marking requirements. ISO 5838-2:1991 focuses solely on dimensions (given in millimetres) while materials and mechanical properties are addressed separately in ISO 5838-1.

Key topics and requirements

Scope: Dimensions for Steinmann-type skeletal pins used in surgical fixation.

Dimensional references: All sizes and shapes are defined by figure 1 to figure 5 and table 1 to table 3 in the standard (diameters, lengths and key shape features).

Pin ends:

One end must be a point (tip) - a recommended tip profile is illustrated.
The opposite end must conform to one of three forms:
- Form A - plain/rounded
- Form B - square
- Form C - triangular
The geometry of these end forms is specified in figures 3–5 and tables 2–3.

Units and notation: All dimensions are in millimetres.

Packaging and marking: Packaging must state the pin length, diameter, and end form (rounded, square, triangular).

Design considerations: The standard notes that tip design may need adaptation according to insertion method and bone type (cancellous vs cortical), highlighting practical differences in clinical use.

Applications and who uses it

ISO 5838-2 is intended for professionals involved in the design, manufacture, procurement and regulation of orthopedic implants:

Orthopedic implant manufacturers - to ensure pins meet internationally accepted dimensional specifications for compatibility with instruments and procedures.

Medical device designers and engineers - for product drawings, tooling and quality control criteria.

Regulatory and quality managers - as part of conformity evidence and product documentation.

Procurement and sterile processing teams - to verify packaging labelling and selection of appropriate pin sizes.

Orthopedic surgeons and clinical staff - for understanding available pin geometries and expected dimensions when selecting implants.

Related standards

ISO 5838-1 - Implants for surgery - Skeletal pins and wires - Part 1: Materials and mechanical properties (materials/mechanical requirements complementary to Part 2).

ISO 5838-3 - Part 3: Kirschner skeletal pins - Dimensions.

Keywords: ISO 5838-2:1991, Steinmann skeletal pins, implants for surgery, skeletal pins and wires, dimensions, surgical implants, ISO 5838-1, pin end forms, packaging marking.

ISO 5838-2:1991 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and who uses it

Related standards

Технические детали

ISO 5838-1:1995

Implants for surgery — Skeletal pins and wires — Part 1: Material and mechanical requirements

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines