ISO 5954:2014 PDF

Name: ISO 5954:2014 — Cold-reduced carbon steel sheet according to hardness requirements
SKU: ISO 5954:2014
Price: 25 EUR
Availability: InStock

Cold-reduced carbon steel sheet according to hardness requirements

Название (английский):

ISO 5954:2014

Cold-reduced carbon steel sheet according to hardness requirements

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 20 февраля 2014 г.
Издание:: ISO IS 5954 edition 4 version 1
ICS:: 77.140.50

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

ISO 5954:2014 applies to cold-reduced carbon steel sheet and corresponding hardness requirements. It is suitable for applications where the surface is of prime importance. The following are common hardness ranges (see 6.6): CRH-50: Rockwell B 50 to 70; CRH-60: Rockwell B 60 to 80; CRH-70: Rockwell B 70 to 90; CRH-NN: Any Rockwell B range of 20 points up to and including HRB 90 maximum (designated minimum of specified range will be shown).

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 5954:2014 specifies requirements for cold-reduced carbon steel sheet according to hardness requirements. The standard applies to skin-passed or annealed cold-reduced sheet intended for applications where surface quality is a primary concern. Hardness is reported as Rockwell B (HRB) and typical grade designations are CRH-50, CRH-60, CRH-70, and CRH‑NN (user‑agreed ranges).

Key topics and technical requirements

Hardness ranges (as‑shipped)

CRH-50: HRB 50–70
CRH-60: HRB 60–80
CRH-70: HRB 70–90
CRH‑NN: any HRB 20‑point range up to HRB 90 (agreed between purchaser and supplier)
Conversions for thinner product (<1 mm) are given using HR30T in the standard.

Surface characteristics

Two surface quality levels: A (unexposed) and B (exposed).
Surface finish, roughness ranges and suitability for metallic or organic coatings must be agreed at ordering.
Products are normally oiled for rust protection; unoiled delivery is possible with limited supplier responsibility for oxidation.

Dimensions and coil sizes

Produced from nominal 0.36 mm and above (commonly up to 3 mm) and in widths of 600 mm and over (coils and cut lengths).

Chemical composition and analysis

Heat analysis limits (examples): Carbon max 0.15% for CRH-50, 0.25% for CRH-60/70/NN; Mn ≤ 0.60%, P ≤ 0.15%, S ≤ 0.03%.
Limits for additional elements (Cu, Ni, Cr, Mo, Nb, V, Ti) and sum constraints are specified.
Product analysis tolerances are defined to account for heterogeneity.

Manufacture and performance

Hardness control is typically achieved by controlling carbon and/or phosphorus.
Weldability: normally weldable but becomes more difficult when C > 0.15% or P > 0.05%.
Skin‑pass influences final hardness and formability; shipped hardness is the acceptance basis.

Testing, tolerances and inspection

Rockwell hardness testing per ISO 6508; dimensional/shape tolerances per ISO 16162. Sampling, tests, retests and marking requirements are covered.

Applications and who uses it

Typical users: steel producers, OEMs, automotive and white‑goods manufacturers, appliance and furniture makers, metal coatings processors, fabricators, and procurement/quality engineers.

Typical uses: exposed panels, painted or electrolytically coated parts, precision formed components where surface appearance and controlled hardness are critical.

Related standards

ISO 6508 - Metallic materials - Rockwell hardness test

ISO 16162 - Cold‑rolled steel sheet products - Dimensional and shape tolerances

ISO 3574 - (commercial/drawing qualities; note ISO 5954 does not cover these)

ISO 5954:2014 is a practical reference for specifying surface finish, hardness grade (CRH), chemical limits and acceptance criteria when ordering cold‑reduced carbon steel sheet for surface‑sensitive applications.

ISO 5954:2014 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

SIST EN ISO 6508-1:2024

Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)

ISO 16162:2010

Continuously cold-rolled steel sheet products — Dimensional and shape tolerances

ISO 3574:2008

Cold-reduced carbon steel sheet of commercial and drawing qualities

ISO 5954:2007

Cold-reduced carbon steel sheet according to hardness requirements