ISO 6311:1980 PDF

Name: ISO 6311:1980 — Road vehicles — Brake linings — Internal shear strength of lining material — Test procedure
SKU: ISO 6311:1980
Price: 25 EUR
Availability: InStock

Road vehicles — Brake linings — Internal shear strength of lining material — Test procedure

Название (английский):

ISO 6311:1980

Road vehicles — Brake linings — Internal shear strength of lining material — Test procedure

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 2
Дата публикации:: 1 июня 1980 г.
Издание:: ISO IS 6311 edition 1 version 1
ICS:: 43.040.40

Тип поставки:

Full version30 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:30 €

Описание (английский):

Specifies a method of measuring the internal shear strength of brake lining materials. Applies to friction materials for disc brake pads and drum brake linings to be used in road vehicle brakes. A figure shows the principle of the test rig. Describes the apparatus to be used as well as sampling and conditioning.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 6311:1980 - "Road vehicles - Brake linings - Internal shear strength of lining material - Test procedure" defines a laboratory method to measure the internal shear strength of brake lining (friction) materials used for disc brake pads and drum brake linings on road vehicles. The standard describes the required apparatus, specimen sampling and conditioning, test setup (including a schematic test rig), the controlled loading procedure to induce shear failure, and the required test reporting.

Key topics and technical requirements

Scope: Applies to friction materials intended for vehicle brake pads and linings; the test is intended to produce rupture of the lining material under shear.

Specimen sampling: At least five specimens must be taken from stock. Specimens should be oriented so they shear in the direction representative of the most stressed brake shoe or pad under normal service.

Specimen dimensions: Flat specimens with nominal dimensions:

Length: 20 ± 0.1 mm
Width: 20 ± 0.1 mm
Thickness: 5 ± 0.1 mm or 10 ± 0.1 mm

Apparatus:

A tensile or compression testing machine equipped with a fixture that applies shear loading and records the peak shear load (examples: peak pointer, load-indicating spring or equivalent recording device).
A mounting assembly of two sliding blocks with minimal friction, maximum clearance 0.1 mm, and designed to receive the pad/lining so the specimen fills the space to prevent slipping.
Load application must be concentric (apply at the fixture center) and parallel to the sliding guide.

Load application rate: Load should increase continuously at 4 500 ± 500 N/s. It is recommended that instantaneous rate control be within 4 500 ± 2 250 N/s when shear force exceeds 5 000 N. Load must not be applied by impacts.

Reporting: Report the maximum applied load (mean of at least five tests) in newtons and the sheared area in mm².

Practical applications

Validate the structural integrity of brake lining materials during material qualification and quality control.

Compare shear performance of different friction formulations, backing adhesives, or bonded assemblies.

Support safety and durability assessments for disc brake pads and drum brake linings used in passenger cars, commercial vehicles, and aftermarket components.

ISO 6311:1980 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications

Who should use this standard

Related standards

Технические детали

SIST EN ISO 6115:2000

Shipbuilding - Trawl winches (ISO 6115:1988)

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

ISO/ASTMTR52917-EB

Additive Manufacturing — Round Robin Testing — General Guidelines