ISO 6332:1988 PDF

Name: ISO 6332:1988 — Water quality — Determination of iron — Spectrometric method using 1,10-phenanthroline
SKU: ISO 6332:1988
Price: 25 EUR
Availability: InStock

Water quality — Determination of iron — Spectrometric method using 1,10-phenanthroline

Название (английский):

ISO 6332:1988

Water quality — Determination of iron — Spectrometric method using 1,10-phenanthroline

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 11 февраля 1988 г.
Издание:: ISO IS 6332 edition 2 version 1
ICS:: 13.060.50

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

Specifies a procedure for water and waste water. Describes the determination of total iron by direct determination and determination after decomposition, of total dissolved iron and of dissolved iron(II). The procedures are applicable to concentrations between 0,01 and 5 mg/l. Concentrations above 5 mg/l may be determined after dilution of the sample.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 6332:1988 specifies a spectrometric method using 1,10-phenanthroline for the determination of iron in water and wastewater. The standard covers procedures for measuring:

Total iron (direct or after decomposition),

Total dissolved iron (Fe(II) + Fe(III)), and

Dissolved iron(II).

Applicable concentration range is 0.01–5 mg/L (samples above 5 mg/L should be diluted). The method is based on forming an orange-red Fe(II)-1,10-phenanthroline complex and measuring absorbance at about 510 nm.

Key topics and technical requirements

Reagents: analytical-grade sulfuric, nitric and hydrochloric acids; acetate buffer; hydroxylammonium chloride (reducing agent); 1,10-phenanthroline reagent; potassium peroxodisulfate (oxidant); iron stock and standard solutions.

Apparatus: spectrometer (prism or grating) set near 510 nm, photometric cells (optical path ≥ 10 mm recommended), 0.45 µm membrane filters, and a 100 mL oxygen (Winkler) flask for some procedures.

Sample handling: follow ISO 5667-1 sampling guidance; acidify samples to pH 1 immediately after collection to stabilize iron and avoid oxidation/precipitation.

Analytical procedure:

For total iron: direct test or chemical decomposition (HNO3 + HCl, followed by SO3 fumes evaporation) then oxidation (K2S2O8 boiling or autoclave) if needed.
Reduce Fe(III) to Fe(II) with hydroxylammonium chloride; adjust pH to 3.5–5.5 with acetate buffer; add 1,10-phenanthroline and incubate in the dark ~15 min.
Measure absorbance at ~510 nm against a blank and calculate concentration using calibration curves.

Calibration & quality control: prepare series of reference solutions; generate separate calibration curves for each iron form, instrument and cell path length; check calibration frequently and for each new reagent batch.

Reporting & precision: specified reporting resolution (e.g., 0.001 mg/L for 0.010–0.100 mg/L). Precision data and repeatability are given in the standard.

Interferences & safety:

Potential interferences: Cu, Co, Cr, Zn (when ≥10× iron); Ni (>2 mg/L); Bi, Ag, Hg (>1 mg/L); Cd (>50 mg/L); cyanides and sulfides require care.
Warning: acidification can release toxic gases-take appropriate safety precautions.

Applications and users

Environmental and municipal water laboratories,

Wastewater treatment facilities,

Regulatory agencies monitoring compliance with water quality limits,

Research laboratories studying iron chemistry in aquatic systems.

Practical applications include routine monitoring of drinking water, surface water, groundwater and wastewater streams to assess corrosion, treatment efficiency, and ecological impacts.

ISO 6332:1988 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

SIST EN ISO 5667-1:2023

Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO…

SIST ISO 6332:1996

Water quality -- Determination of iron -- Spectrometric method using 1,10-phenanthroline

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies