ISO 6362-3:2022 PDF

Name: ISO 6362-3:2022 — Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Tolerances on form and dimensions for extruded rectangular bars
SKU: ISO 6362-3:2022
Price: 25 EUR
Availability: InStock

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Tolerances on form and dimensions for extruded rectangular bars

Название (английский):

ISO 6362-3:2022

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 3: Tolerances on form and dimensions for extruded rectangular bars

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 1 июля 2022 г.
Издание:: ISO IS 6362 edition 4 version 1
ICS:: 77.150.10

Тип поставки:

Full version120 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

This document specifies the tolerances on dimensions and shape of wrought aluminium and aluminium alloy extruded rectangular bars, having thicknesses in the range from 2 mm up to 240 mm and widths in the range from 10 mm up to 600 mm. It is applicable to extruded rectangular bars.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 6362-3:2022 - "Wrought aluminium and aluminium alloys - Extruded rods/bars, tubes and profiles - Part 3" - specifies tolerances on form and dimensions for extruded rectangular bars. It applies to extruded rectangular aluminium and aluminium-alloy bars with thicknesses from 2 mm to 240 mm and widths from 10 mm to 600 mm. This fourth edition (2022) updates alloy groupings and corrects editorial errors from the 2012 edition.

Key topics and technical requirements

The standard defines measurable dimensional and shape requirements for quality control and acceptance:

Dimensional tolerances (width & thickness)

Separate tolerance tables for Alloy Group I and Alloy Group II covering combinations of width (b) and thickness (t).
Tolerances vary with size; for example, narrow bars (10–18 mm width) have tighter limits than wide sections.

Corner radii

Maximum corner radii specified by thickness ranges (e.g., Group I: 0.6 mm max for t ≤ 10 mm; Group II: up to 5.0 mm for t ≤ 240 mm).

Fixed-length tolerances and squareness of cut ends

Permissible fixed-length tolerances given for lengths L ≤ 2 000 mm, up to 8 000 mm, with squareness of cut ends required to be within half the fixed-length tolerance.

Form tolerances (measurements are made with bar supported on a horizontal base plate)

Flatness (convexity/concavity) - allowable deviation e by width ranges.
Straightness - limits per 1 000 mm and in any 300 mm section.
Twist - allowable twist per 1 000 mm and per total length segments.
Squareness (cross-section) - maximum deviation Z relative to thickness.

Materials and alloy grouping

Alloys are listed (see ISO 6362-7) and divided into Group I and Group II to reflect manufacturing difficulty; some specific alloys were added in the 2022 update.

Temper exceptions

Shape tolerances do not apply to tempers O, H111, H112 and TX510 type tempers.

Applications and users

ISO 6362-3:2022 is used by:

Extrusion manufacturers for production tolerance control and process setup.

Quality inspectors and testing labs to verify compliance with dimensional/form tolerances.

Procurement and purchasing to specify acceptance criteria in contracts.

Design and fabrication engineers who require toleranced sections for assemblies and machining allowances.

Standards compliance teams for regulatory and contractual conformity.

Keywords: ISO 6362-3:2022, extruded rectangular bars, wrought aluminium, tolerances, flatness, straightness, twist, corner radii, alloy groups.

ISO 6362-3:2022 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

ISO 6362-7:2012

Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition

ISO 6362-1:1986

Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles — Part 1: Technical conditions f…

ISO 8689-1:2000

Water quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…

ISO/ASTM51540-04(2012)

Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)

ISO/ASTM51204-04

Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)

ISO/ASTM51431-05

Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…

ISO/ASTM52628-20e1

Standard Practice for Dosimetry in Radiation Processing

ISO/ASTM52921-13(2019)

Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies