ISO 6375:1980 PDF

Name: ISO 6375:1980 — Carbonaceous materials for the production of aluminium — Coke for electrodes — Sampling
SKU: ISO 6375:1980
Price: 25 EUR
Availability: InStock

Carbonaceous materials for the production of aluminium — Coke for electrodes — Sampling

Название (английский):

ISO 6375:1980

Carbonaceous materials for the production of aluminium — Coke for electrodes — Sampling

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 5
Дата публикации:: 1 сентября 1980 г.
Издание:: ISO IS 6375 edition 1 version 1
ICS:: 71.100.10

Тип поставки:

Full version75 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:75 €

Описание (английский):

Is applicable to cokes manufatured from petroleum or pitch intended specifically for use in the manufacture of electrodes used for the electrolytic production of aluminium. Includes provisions that are mainly concerned with the composition of samples for physical measurements and for particle size analysis.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 6375:1980 specifies standardized methods for sampling coke materials used in the production of aluminium electrodes. This international standard focuses on cokes manufactured from petroleum or pitch specifically for electrolytic aluminium production. It outlines procedures to obtain representative samples from lots of calcined coke, ensuring the accuracy and consistency required for physical measurements and particle size analysis.

Coke for electrodes plays a critical role in aluminium smelting, and uniformity in its chemical and physical properties is essential for efficient and reliable electrolytic processes. ISO 6375:1980 provides detailed guidance on sampling techniques designed to address the unique characteristics of electrode coke, distinct from other carbonaceous materials such as metallurgical coke.

Key Topics

Scope and Application Applies exclusively to petroleum- or pitch-based cokes intended for electrode manufacture in aluminium production. Highlights the need for samples that represent the whole lot’s average qualities with precision.

Sampling Methods Utilizes automatic sampling apparatus whenever feasible. Hand-operated tools should be designed to capture sufficient bulk (1–2 kg samples) with proper sweep widths. Sample containers must not be overfilled beyond 90% capacity.

Sample Definitions

Increment: Material taken in a single action from a sampling unit.
Partial Sample: Taken from each 1000-ton fraction, divided for uniformity check, particle size analysis, and preparation of representative samples.
Representative Sample: Combined aggregate of partial samples representing the entire consignment or load.

Number and Size of Samples At least 30 increments per 1000 tons of coke are typically required, adjusted based on lot size. For consignments under 1000 tons, increment numbers increase to address heterogeneity risks.

Sample Preparation and Processing Samples are mechanically homogenized and reduced in size by quartering to approximately 8 kg. Milling is performed until the material passes through specified sieves (commonly 5 mm aperture) to facilitate uniform testing. Care is taken to avoid contaminations and loss of fine particles.

Sampling Special Cases Separate sampling procedures for wagons, ships, and varying transport conditions are defined to maintain sample integrity and traceability.

Sampling Documentation Each sample must be accompanied by a detailed report including product type, supplier details, consignment identification (ship, wagon, hold), number and mass of increments, and any unusual conditions noted during sampling.

Applications

Electrolytic Aluminium Production Enables producers and suppliers to verify consistency and quality of electrode coke critical to aluminium smelting efficiency.

Quality Control and Inspection Facilitates uniform sampling protocols to help material testing laboratories, smelters, and coke manufacturers assess chemical and physical properties reliably.

Trade and Regulatory Compliance Provides internationally accepted sampling standards, ensuring transparent and reproducible evaluation of coke consignments.

Research and Development Standardized coke sampling aids in development of improved electrode grades and processes, contributing to enhanced aluminium production technologies.

Related Standards

ISO 2309 - Coke Sampling Provides general guidance on sampling of metallurgical coke, referenced for detailed sampling apparatus and procedures.

ISO 1988 - Hard Coal Sampling Addresses theoretical and practical aspects of coal sampling which underpin coke sampling methodologies.

ISO 6206 - Vocabulary of Sampling Terms Defines terminology related to chemical product sampling, supporting clarity and consistency in application.

ISO 6375:1980 remains essential for stakeholders in the aluminium production chain, ensuring coke electrode sampling delivers representative, accurate data necessary for process control and quality assurance in the electrolytic extraction of aluminium. By following these standardized sampling procedures, industries can minimize variability and enhance trust in material assessment across global markets.

ISO 6375:1980 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 2309:1973

Title missing - Legacy paper document

BS ISO 19880-7:2025

Gaseous hydrogen. Fuelling stations. Rubber O-rings.

SIST ISO 6206:1995

Chemical products for industrial use -- Sampling -- Vocabulary