ISO 6636-1:1986 PDF

Name: ISO 6636-1:1986 — Fruits, vegetables and derived products — Determination of zinc content — Part 1: Polarographic method
SKU: ISO 6636-1:1986
Price: 25 EUR
Availability: InStock

Fruits, vegetables and derived products — Determination of zinc content — Part 1: Polarographic method

Название (английский):

ISO 6636-1:1986

Fruits, vegetables and derived products — Determination of zinc content — Part 1: Polarographic method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 5
Дата публикации:: 24 апреля 1986 г.
Издание:: ISO IS 6636 edition 1 version 1
ICS:: 67.080.01

Тип поставки:

Full version75 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:75 €

Описание (английский):

The method consists in ashing of a test portion in a muffle furnace at 525+25 C, treating the ash obtained with hydrochloric acid, neutralizing with ammonia solution and determing of the value using an ammonia/ammonium chloride electrolyte. Copper, tin, lead and cadmium do not interfere.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 6636-1:1986 specifies a polarographic method for the determination of zinc content in fruits, vegetables and derived products. The procedure covers sample drying and ashing, acid digestion of the ash, pH adjustment with ammonia, and quantification by polarography using an ammonia/ammonium chloride electrolyte and a mercury-dropping electrode. The method is suitable for zinc concentrations > 0.05 mg/kg. Copper, tin, lead and cadmium are reported not to interfere.

Key topics and technical requirements

Scope: Determination of zinc in agricultural, fruit and vegetable products by polarography.

Sample prep:

Typical test portion: 10–25 g (weighed to 0.01 g).
Drying at 110–120 °C, then ashing in a muffle furnace with controlled ramping to 525 ± 25 °C; total ashing ≈ 6 h.
If carbon remains, wet with H2O and HNO3, evaporate and re-ash until carbon-free.

Chemical treatment:

Dissolve ash in diluted HCl, transfer to 50 mL volumetric flask, adjust pH to about 10 with 25% ammonia, dilute and filter.
Use ammonium chloride/ammonia electrolyte (specified concentrations in the standard).
Add sodium sulfite (1 mol/L) as stated before polarographic measurement.

Instrumentation:

Polarograph with a mercury-dropping electrode (cathode) and mercury anode in the electrolyser.
Scan polarogram between approximately –1.0 and –1.6 V; zinc half-wave near –1.2 V.

Standards & calibration:

Preparation of zinc standard solutions from metallic zinc (≥99% purity) and use of standard additions to determine recovery by extrapolation.

Quality and repeatability:

Method measures zinc >0.05 mg/kg.
Repeatability: difference between two determinations (same operator, apparatus, lab) should not exceed 5% of the mean.

Reporting:

Results expressed in mg/kg, reported to one decimal place; include method and any non‑standard conditions.

Applications and users

Food testing and quality-control laboratories performing zinc content analysis for:

Nutritional labeling and composition analysis.
Regulatory compliance and monitoring of produce and processed fruit/vegetable products.
Research studies on micronutrient content in agricultural products.

Useful for manufacturers, public health agencies, and analytical service providers requiring a validated polarographic procedure.

Related standards

ISO 6636-2: atomic absorption spectrometric method for zinc (complementary technique).

ISO 6636-3: dithizone spectrometric method.

ISO 874: sampling of fresh fruits and vegetables (sampling guidance referenced by this method).

Keywords: ISO 6636-1:1986, zinc determination, polarographic method, fruits and vegetables, muffle furnace, ammonia/ammonium chloride electrolyte, food testing, analytical method.

ISO 6636-1:1986 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

SIST ISO 6636-2:1995

Fruits, vegetables and derived products -- Determination of zinc content -- Part 2: Atomic absorption spectro…

SIST ISO 6636-3:1995

Fruit and vegetable products -- Determination of zinc content -- Part 3: Dithizone spectrometric method

EN ISO 8742:2026

Fasteners - Grooved pins - One-third-length center grooves (ISO 8742:2026)