ISO 6638-1:1985 PDF
Fruit and vegetable products — Determination of formic acid content — Part 1: Gravimetric method
Fruit and vegetable products — Determination of formic acid content — Part 1: Gravimetric method
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 5
- Дата публикации:
- 21 ноября 1985 г.
- Издание:
- ISO IS 6638 edition 1 version 1
- ICS:
- 67.080.01
The method consists in quantitative entraining by steam of the acid present in a test portion and reducing of mercury(II)chloride by the acid to mercury(I)chloride, followed by determing of the acid content from the yield of the mercury(I)chloride.
Abstract
Overview
ISO 6638-1:1985 specifies a gravimetric laboratory method for the determination of formic acid in fruit and vegetable products. The procedure uses steam entrainment (distillation) to transfer formic acid from a test portion, chemically reduces mercury(II) chloride with the formic acid to produce mercury(I) chloride (Hg2Cl2), and quantifies formic acid from the mass of precipitated mercury(I) chloride. Part 2 of ISO 6638 describes an alternative titrimetric method.
Key topics and technical requirements
- Principle: quantitative steam entrainment of formic acid, reduction of HgCl2 to Hg2Cl2, and gravimetric measurement of Hg2Cl2 yield.
- Apparatus: analytical balance, steam distillation assembly (steam generator, flasks A & B, condenser), conical flasks (500 ml and 2 l), Schott filter G4 (10–20 µm) or sintered glass, desiccator, oven (100 ± 2 °C), mixer/grinder, Whatman No. 1 filter paper, hotplate, evaporating dish, reflux condenser and boiling water bath.
- Reagents (analytical grade): barium carbonate or calcium carbonate; mercury(II) chloride + sodium chloride solution (100 g HgCl2 + 30 g NaCl per 1 000 ml); sodium acetate (500 g/l); 10% HCl (v/v); tartaric acid; ethanol; diethyl ether; distilled water.
- Sample preparation: liquids, pastes or solids are homogenized; test portions are typically 25–50 g (or ml) and must contain ≤ 0.15 g formic acid.
- Procedure highlights: distillation with added tartaric acid and carbonate in paired flasks, collection and processing of distillate/filtrate, evaporation, addition of reagents, 2-hour reflux to form Hg2Cl2, filtration on pre-dried Schott filter, washing (water, ethanol, ether), drying at 100 °C for 1 hour, and precise weighing (±0.0002 g).
- Calculations: formic acid content is calculated from the mass of Hg2Cl2 precipitate using the conversion factor given in the standard (conversion factor 0.0975 is used in the method).
- Quality control: perform two determinations; repeatability - the difference between paired results must not exceed 2% of the mean. Test reports must state method, results (to three decimals), and any non‑standard conditions.
Applications and users
- Food testing and quality control laboratories analyzing processed fruit and vegetable products for formic acid content.
- Analytical chemists and method developers validating gravimetric assays.
- Regulatory agencies and manufacturers requiring standardized, comparable results for product safety, labeling, or compliance.
- Research groups studying organic acid profiles in agricultural products.
Related standards
- ISO 6638/2 - Determination of formic acid content: titrimetric method (alternative technique).
- General ISO guidance on sampling and reporting for agricultural and food product chemical analysis.
Keywords: ISO 6638-1:1985, formic acid determination, gravimetric method, fruit and vegetable products, steam distillation, mercury(II) chloride reduction, mercury(I) chloride, food quality control, analytical method.
Note: The method uses mercury compounds; follow institutional safety and hazardous-waste disposal regulations.
Технические детали
- Технический комитет
- ISO/TC 34/SC 3 - Fruits and vegetables and their derived products
- SKU
- ISO 6638-1:1985
Похожие стандарты
Упомянутые в описании и другие стандарты ISO
SIST ISO 6638-2:1995
ДействующийFruit and vegetable products -- Determination of formic acid content -- Part 2: Routine method
Overview SIST ISO 6638-2:1995 (Fruit and vegetable products - Determination of formic acid content - Part 2: Routine method) establishes an internationally recognized routine titrimetric method for q…
ISO 8689-1:2000
ДействующийWater quality — Biological classification of rivers — Part 1: Guidance on the interpretation of biological qu…
Overview ISO 8689-1:2000, titled Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates, is…
ISO/ASTM51540-04(2012)
ОтменёнStandard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
Significance and Use4.1 The radiochromic liquid dosimetry system provides a means of measuring absorbed dose in materials (5-7). Under the influence of ionizing radiation, chemical reactions take pla…
ISO/ASTM51204-04
ДействующийStandard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
Significance and Use4.1 Food products may be treated with ionizing radiation, such as gamma-rays from 60Co or 137Cs sources, for numerous purposes, including control of parasites and pathogenic micro…
ISO/ASTM51431-05
ОтменёнStandard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food P…
Significance and Use4.1 Food products may be treated with acceleratorgenerated radiation (electrons and X-rays) for numerous purposes, including control of parasites and pathogenic microorganisms, in…
ISO/ASTM52628-20e1
ДействующийStandard Practice for Dosimetry in Radiation Processing
1.1 This practice describes the basic requirements that apply when making absorbed dose measurements in accordance with the ASTM E61 series of dosimetry standards. In addition, it provides guidance o…
ISO/ASTM52921-13(2019)
ДействующийStandard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies
Significance and Use 3.1 Although many additive manufacturing systems are based heavily upon the principles of Computer Numerical Control (CNC), the coordinate systems and nomenclature specific to CN…
ISO/ASTMTR52917-EB
ДействующийAdditive Manufacturing — Round Robin Testing — General Guidelines
This document outlines the steps with regard to aspects of design to conduct and run a round robin study (RRS) to assess the degree of variability in an additive manufacturing material or process. Th…