ISO 683-15:1992 PDF

Name: ISO 683-15:1992 — Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines
SKU: ISO 683-15:1992
Price: 25 EUR
Availability: InStock

Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines

Название (английский):

ISO 683-15:1992

Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 12
Дата публикации:: 12 августа 1992 г.
Издание:: ISO IS 683 edition 2 version 1
ICS:: 27.020

Тип поставки:

Full version180 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:180 €

Описание (английский):

Gives the requirements of delivery for certain grades of wrought high-alloy materials used for intake and exhaust valves in reciprocating internal combustion engines. Is applicable to bars, wire, wire rod and forgings. In addition, the general technical delivery requirements of ISO 404 are applicable. Annex A "Technical Supplement" gives requirements for property values as the result of processing after delivery.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 683-15:1992 specifies delivery requirements for valve steels for internal combustion engines. It covers wrought high‑alloy materials used for intake and exhaust valves, applicable to bars, wire, wire rod and forgings. The part defines material grades, chemical composition limits, delivery heat‑treatment conditions and surface finishes, and references general technical delivery rules in ISO 404. Annex A provides a technical supplement with property values after processing.

Key topics and requirements

Scope and product forms: Applies to valve materials intended for reciprocating internal‑combustion engine valves in the forms of bars, wire, wire rod and forgings. Excludes wear/corrosion‑resistant alloys for valve seats.

Grade classification: Materials are divided by structure into martensitic steels (typically for intake valves and valve stems) and austenitic alloys (primarily for exhaust valves). Specific grades and their chemical limits are listed in the standard (table references).

Chemical composition and product analysis: Cast‑analysis limits are specified (table 1) with permissible deviations for product analysis (table 2). Product analysis sampling and preparation follow ISO 377 series and ISO/TR 9769 guidance.

Heat‑treatment and surface finish: Delivery conditions (soft annealed, quenched & tempered, precipitation‑hardened, controlled cooled, etc.) and surface finishes (peeled, ground, polished, as‑rolled) must be agreed at order.

Mechanical properties and testing: Mechanical property requirements at room temperature are given for specified conditions (see table 3 and Annex A). Testing methods reference ISO standards for tensile (ISO 6892), hardness (ISO 6506/6508), grain size (ISO 643), and wire/rod dimensions (ISO 8457‑1).

Inspection and certification: Permitted documents include a test report, inspection certificate, or inspection report (ISO 10474). Sampling rules, number of tests per cast/heat, and retest/complaint procedures align with ISO 404.

Marking and traceability: Coils/bundles and larger bars require labeling with manufacturer, grade, cast number and nominal size; guide bars are marked for bundles.

Applications and users

Who uses ISO 683-15: Material engineers, valve manufacturers, automotive and engine OEMs, forging and heat‑treatment shops, quality/inspection teams, and procurement specialists specifying valve steels.

Practical use cases: Specifying valve material for engine design, ordering valve stock (bars/wire/forgings), setting inspection/testing requirements for incoming materials, ensuring traceability and compliance with international delivery requirements.

Related standards

ISO 404 - General technical delivery requirements for steel

ISO 6892, ISO 6506, ISO 6508, ISO 643 - Test methods referenced for mechanical testing, hardness and grain size

ISO 377‑1/2, ISO/TR 9769, ISO 10474 - Sampling, analysis and certification guidance

Keywords: ISO 683-15, valve steels, internal combustion engines, martensitic valve materials, austenitic valve alloys, chemical composition, heat‑treatment, mechanical testing, material delivery requirements.

ISO 683-15:1992 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and users

Related standards

Технические детали

BS EN ISO 4048:2018

Leather. Chemical tests. Determination of matter soluble in dichloromethane and free fatty acid content.

BS ISO 3776-3:2009

Tractors and machinery for agriculture. Seat belts. Requirements for assemblies.

ISO/TR 9769:1990

Steel and iron — Review of available methods of analysis

BS EN ISO 6892-2:2026

Metallic materials. Tensile testing - Method of test at elevated temperature

ISO 6435:2024

Stainless steel bars for the reinforcement of concrete

ISO 8457-1:1989

Steel wire rod — Part 1: Dimensions and tolerances

ISO 10474:2013

Steel and steel products — Inspection documents